Drilling mud desilterCN100 is the second class solids control equipment of drilling-fluid solid control system. The design of desilter cyclones are based on the centrifuge-setting principle of particles. The separating drilling fluid goes into the cyclone along its inner-wall at a certain pressure and speed made by the pump. The great particles are going down spirally along the inner-wall of the cyclone at the centrifugal force and the gravity , then running out through the underset nozzle and falling down on the small mush shale shaker for further separation . The other fluid goes up along the centre of the cyclone, and goes into the firth class separating equipment –centrifuge for further separating.
CN series Desilter Technical Parameters
Model | CN100×10 | CN100×10 |
Screen area | 1.0m2(600×1600mm) | No Under fluids Shaker |
Capacity | ≤1056GPM | ≤1056GPM |
Cone size | 4" (100mm) | |
Cone number | 10-20 Ea Cones, Specify cones No. when ordering | |
Pressure | 0.21~0.4Mpa | |
Matching pump | SB8x6-13(55kw) | |
Inlet Size | 100-150mm | 100-150mm |
Outlet Size | 150-200mm | 150-200mm |
Separation size | 15-20μm | |
