OTP6126 handheld gigabit Ethernet test set is one of OPWILL's handheld test products. It is designed for Ethernet network deployment and comprehensive test. OTP6126 fully meets Ethernet standard, offering complete ethernet test functionalities with lightweighted, flexible and rugged qualities. It can be applied to indoor laboratory or outdoor field environment and provide carrier-class Ethernet test solution for network expert.
Ø Lightweighted, compact, rugged, flexibly used in outdoor field environment
Ø Quick power on, high-resolution color touch screen
Ø Friendly key design for flexible scrolling and selecting
Ø More comprehensive test function, higher cost-effective
Ø Offer complete gigabit Ethernet solution from installation and commissioning to operation and maintenance
Lightweight structure design, comprehensive test functionalitiesFunction Features
Ø Generate full-duplex 10/100/1000 Mbps ethernet line speed stream
Ø Throughput, frame loss, latency, back-to-back measurements as per RFC2544
Ø RFC3393 jitter test
Ø Layer1/2 BERT test
Ø IP connect performance test
Ø Maximum generate 4 streams, the parameter of streams can be configured: MAC address, VLAN label, MPLS, IP address, payload and bandwidth.
Ø Flow priority can be set according to CoS and ToS/DSCP
Ø Package capture on line
Ø Test curve used for understanding network condition quickly and accurately
Ø Allowing automatic SLA verification through RFC2544, it is an efficient test tool for verifying SLA
Ø Installation operation maintenance and troubleshooting of gigabit Ethernet and IP service
Ø 2 layer CoS setting for verifying metro Ethernet service
RFC2544 Test
OTP6126 handheld gigabit Ethernet test set fully support RFC2544 standard, offer throughput, latency, frame loss and back-to-back test in metro network and generate complete test report.
Throughput Test
Latency Test
Frame Loss Test
Back-to-back Test
BERT Test
Transparent transport of Ethernet service over physical media is increasingly used in current network. OTP6126 Ethernet test set support Ethernet bit-error-rate testing (BERT) over layer1/2.
Frame Analysis Test
Frame generation and analysis test offer the best test ways for BER and RFC2544 test. Long-term capacity and performance test can find frame loss, in this way, service providers can test Ethernet links and verify SLAs performance.
OTP6126 Series Specifications
SPECIFICATIONS
Optical interface
1000Base-SX
1000Base-LX
1000Base-ZX
Wavelength(nm)
850
1310
1550
Tx level (dBm)
-9 to -3
-9.5 to -3
0 to +5
Rx level sensitivity (dBm)
-22
-22
-22
Maximum reach
550m
10 km
80 km
Transmission bit rate (Gbit/s)
1.25
1.25
1.25
Reception bit rate (Gbit/s)
1.25
1.25
1.25
Tx operational wavelength range (nm)
830 to 860
1270 to 1360
1540 to 1570
Measurement accuracy
Frequency (ppm)
<0.1
<0.1
<0.1
Optical power (dB)
<0.5
<0.5
<0.5
Transceiver type
SFP
SFP
SFP
Electrical interface
Duplex mode: full/half duplex
Compliance: 10/100/1000 BASE-T
Connector: RJ-45
Maximum reach: 100m
PHYSICAL SPECIFICATIONS
Temperature
Operating: -5°C to 50°C; Storing:-40°C to 70°C
Relative humidity
0% to 95% (non-condensing)
Size (H×W×D)
80mm x 135 mm x 250 mm
Weight
0.5 kg
ORDERING INFORMATION
Products
Model
Description
Handheld Test Set
OTP6126-1
Handheld Ethernet test set, one
10/100/1000Mbps Ethernet electrical
interface and one 1000Mbps Ethernet optical interface
OTP6126-2
Handheld Ethernet test set, two 10/100/1000Mbps Ethernet electrical interface and two 1000Mbps Ethernet optical interface
Accessories
GA14020010
1.25G SFP optical module, 850nm, 550m, SX
GA14020020
1.25G SFP optical module, 1310nm, 10km, LX
GA14020030
1.25G SFP optical module, 1550nm, 80km, ZX
