Mpa Series Warm & Hot Forging Press

1. It was improved base on the original MP hot die forging, so that it can meet the requirements of the users, expanded the use of press.
2. Increased the tonnage of hot die forging press used
3. Enhanced the important parts of the machine tool based on the original design, so as to meet the safety of users of the full load use.
4. Growth of nominal power stroke: General hot forging press the nominal pressure stroke is only around 3 mm; We increased the nominal power stroke to 10mm, to expand the use of machine tools, increased the hot extrusion stroke, but also can be used in warm forging shape.
5. Adopting Germany advanced technology manufacture: 1). The frame adopts solid integrally built cast steel or steel plate weld assembly. Its stiffness in the vertical and horizontal is the best. 2). The both sides of frame have side window, it is easy for the horizontal feeding. It can actualize an automatic forging technology. 3). Powerful upper and lower ejector can reduce the draft and save the cost of raw stock. 4). The high precision and stiffness can actualize precision no-flash die forging. 5). The special eccentric shaft and connecting rod can support a major eccentric-load. It can satisfy multi-station forging press. The slider uses X-type guide, it can ensure the gap of guide rail is precise in the forging process. 6). The clutch and brake adopt the high reliability and durable insert block type clutch blocks. 7). The brake has a water-cooling system to ensure the continuous single blow. The high-speed blow can ensure shot time touch between work-piece and die and improve the life of the die. 8). There is tonnage monitoring system, centralized lubrication, lubricated monitoring control system, bearing temperature monitoring control system and so on. So, the safety operation of machine press can be guaranteed.

TECHNICAL  PARAMETERS
TechnicalData            model		UNIT	MP-315	MP-400	MP-630	MP-1000	MP-1600	MP-2000		MP-2500	MP-3150	MP-4000	MP-5000	MP-6300
Nominalcapacity		KN	3150	4000	6300	10000	16000	20000		25000	31500	40000	50000	63000
Strokeofslide		mm	150	200	220	250	280	300		320	340	360	400	450
Strokeperminute		(S/min)	110	110	110	100	90	85		80	60	55	45	50
Max. dieheight		mm	500	550	630	700	875	950		1000	1050	1110	1500	1615
Dieheightadjustment		mm	8	8	11	14	18	20		22.5	25	28	32	35
Areaof	(KL)	mm	500	550	690	850	1050	1210		1300	1400	1500	1570	1840
	(FB)	mm	750	820	920	1120	1400	1530		1700	1860	2050	2250	2350
AreaofSlide Bottom(RL× FB)		mm	480× 600	520× 650	670× 700	820× 930	1030× 1140	1180× 1260		1260× 1380	1360× 1540	1460× 1710	1550× 1875	1800× 1925
UpperEjector	Type
	pressure	KN	20	30	40	50	80	100		125	160	200	250	300
	Stroke	mm	15	15	15	15	37	40		44	48	52	60	60
LowerEjector	Type											hydraulic	hydraulic	hydraulic
	pressure	KN	100	100	100	150	240	300		375	475	600	650	700
	Stroke	mm	20	20	20	20	37	40		44	48	52/0-200	0-150	0-150
Moterpower		KW	37	45	55	90	110	132		185	185	250	280	300
HeightAboveFloor		mm	4200	4500	4800	5100	6100	6400		6850	7400	7800	8000	8500
OverallDimensions(FB× RL)		mm				4100× 3050	4800× 3300	4900× 3450		5250× 3700	5800× 4100	6100× 4450	6300× 4600	7410× 6000
TotalWeight		ton			50	70	120	165		210	280	380	460	580