MONEL ALLOY K500 WIRE
Monel alloy K500 Wire is one kind of the nickel-copper alloy Wire.Monel alloy K500 Wire combines the excellent corrosion resistance of Monel alloy 400 Wire with the added advantage of greater strength and hardness. Alloy K500 Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition.
Monel alloy K500 Wire is one kind of the nickel-copper alloy Wire.Monel alloy K500 Wire combines the excellent corrosion resistance of Monel alloy 400 Wire with the added advantage of greater strength and hardness. Alloy K500 Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition.
Monel alloy K500 Wire has a greater tendency toward stress-corrosion cracking in some conditions than Monel 400 alloy Wire. The strength of this nickel Copper alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. Nickel alloy K-500 Wire has a greater tendency toward stress-corrosion cracking in some environments.
Monel alloy K500 Wire is resistant to a sour-gas environment. The combined Characteristics of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 Wire particularly suitable for marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.
To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.
Manufacture's Advices to Monel K500 alloy Wire:
Nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
Applications of Monel alloy K500 Wire:
Sour-gas service applications | Oil and gas production safety lifts and valves |
Oil-well tools and instruments | Oil well industry |
Chemical Composition, % of Monel alloy K500 Wire:
Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
63.0-70.0 | Remainder | 2.30-3.15 | .35-.85 | .25 max | 1.5 max | 2.0 max | .01 max | .50 max |
Physical Properties of Monel alloy K500 Wire:
Property | Metric | Imperial |
Density | 8.44 g/cm3 | 0.305lb/in3 |
Melting point | 1350°C | 2460°F |
Co-Efficient of Expansion | 13.7µm/m.°C (20-100°C) | 7.6x10-6 in/in.°F (70-212°F) |
Modulus of rigidity | 66 kN/mm2 | 9573 ksi |
Modulus of elasticity | 179 kN/mm2 | 25962 ksi |
Available Specifications In Our Factory:
Wire Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
The Service Part has more information about Wire Further Processing.
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
