BST-5V10mA is eight-channel computerized battery testing equipment for R&D all types of rechargeable batteries at 0.02 - 10mA up to 5V. This system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
SPECIFICATION
Power supply | AC 110V or AC 220V | |
Current range | Charge:0.02mA~10mADischarge:0.02mA~10mA | |
Current measurement accuracy | ±0.05% of reading + 0.1% of range | |
Voltage range | Charge:10mV~5VDischarge:10mV~5V | |
Voltage measurement accuracy | ±0.05% of reading + 0.1% of range | |
Impedance | ≥10m | |
Power | 30W | |
Max measurement cycles | 65535 cycle | |
Step Time Range | (1min~365*24hours)/Step | |
Data record conditions | Timet:(5 ~60000S) VoltageV:(5mV - 5V) CurrentI:(0.02mA-10mA) | |
Record Frequency | 1HZ | |
Product Dimension | 245mm (W) x 197mm (D) x 60mm (H) | |
Net Weight | 11.5kg | |
Shipping Weight | 35lbs, 22" x 18" x 10" | |
FEATURES | ||
Channels | Eight independent programmable channels. Each channel can set different working modes and works independently. | |
Programs | The software (TC5.3) can set various working modes for measuring capacity and cycle life of all types of rechargeable battery cells. | |
Charge | Charge Mode | Constant Current Charge\Constant Voltage Charge\ Constant Current and Constant Voltage Charge |
End Conditon | Voltage\Current\Relative Time\Capacity | |
Discharge | Discharge Mode | Constant Current Discharge |
End Condition | Current\Current\Relative Time\Capacity\ | |
Cycle | Loop Measure Range | 1~65535 times |
Max Steps Per Loop | 63 | |
Nested Loop | Nested loop FunctionMax Support 3 Layers | |
Time of each working step | 1min≤Single Step Time Range≤365*24 h | |
Data Output | EXCEL\TXT\Graph | |
Test reports and curves for analysis | Different types of curves can be created by software base on use defines. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times-charge/discharge capacity curve, loop times-charge/ discharge efficiency curve, etc. Forms of curves are created by software. User can easily compare the performance of the batteries tested in channels both visually and statistically. Complete record of all the events happened in the test. By checking the record, user will easily find these external interferential causes. | |
Communication Interface | Serial Port (RS232) | |
Protection | lPower-down Data Protection | |
lSetting Protection ConditionSetting Parameter:Low Voltage limit\Upper Voltage limit\Low Current limit\Upper Current limit\Delay Time | ||
Voltage and Current Testing Sample | 4-wire connecting | |
