Container corner fitting
--8pcs in one set, including 2TL,2TR,2BL,2BR
--ISO corner casting,non-standard corner casting and railroad corne casting for 20′,40′,45′,48′,53′container
Technical Requirements
(1)Container corner casting should be in accordance with the regulation of ISO1161
(2)For machining faces:
a. Two relatively parallel faces: Tangent of angle of the two faces is less than 0.3mm.
b. Two vertical faces: Cotangent of angle of two faces is less than 0.3mm.
c. Free of obvious tool bruises.
(3)Not indicated fillet radius R=3 mm.
(4)The thickness of holeless wall should be more than 9mm.
(5)Corner casting must be cleared up without sand, sharp angle, and rags.
