FOGO 3-phase solar inverter series are large capacity power supply systems for electricity, mainly applied for large power consumption or 3 phase 4 line loads, such as communication, factory and corporation UPS system, military, etc.
Features:
Wide input range
High energy efficiency MPPT>99%
Very low harmonic distortion, THD<3%
Selectable power factor
Direct mains connection
Possibility of unlimited parallel connection
Anti-islanding protection with automatic shut down
Monitoring from front of the unit
Galvanic isolation through the transformer
Current strings monitoring, IP21 protection level
Protection against: inverse polarization, short-circuits,
over voltages, insulation failure with output to relay
Automatic reactive energy regulation
Service life of more than 20 years
Features:
Wide input range
High energy efficiency MPPT>99%
Very low harmonic distortion, THD<3%
Selectable power factor
Direct mains connection
Possibility of unlimited parallel connection
Anti-islanding protection with automatic shut down
Monitoring from front of the unit
Galvanic isolation through the transformer
Current strings monitoring, IP21 protection level
Protection against: inverse polarization, short-circuits,
over voltages, insulation failure with output to relay
Automatic reactive energy regulation
Service life of more than 20 years
Electrical Features | FOGO 100 KVA(3 Phase) |
Output power | AC 50/75/100 kW |
Recommend max. PV efficiency | +5% ~ +15% |
Nominal DC power | 52.5/78/105KW |
Nominal AC voltage | 380-400 V,3 Phase |
Nominal frequency | 50 Hz |
Power factor | 1 adjustable ±0.8 |
AC line current (max.) | 90/135/ 180A |
AC current distortion | Nominal power THD<3% (1) |
DC open voltage (max.) | 800 V(2) |
DC MPPT range | 350 ~ 700 V * |
DC input current (max.) | 150/225/ 300A |
Parallel No.(max.) | N×100 kW |
Efficiency (max.) | 96%(with transformer) |
98%(without transformer) | |
Euro efficiency | >94.95%(with transformer) |
>96.78% (without transformer) | |
Environment & Mechanical features | |
Operating temperature | 0ºC ~ +50ºC (3) |
IP standard | IP21 |
Cabinet | FOGO standard |
Weight (with transformer) | 1120KG |
Dimension(H×W×D)(with transformer): | 2150×1200×600 |
Altitude | < 1000m, no power loss |
Relative humidity | 0~ 95%, non-condensation |
General features | |
Cooling | Internal forced ventilation |
External fan control(6 Amax.) | |
Protection functions | Polarity inverter |
AC over/low voltage | |
Over/low frequency | |
DC over voltage | |
Display | LCD |
Selector (AC & DC) | Integrated in the system(optional) |
Communication software | Software for communication |
Equipment supervision self checking | Yes |
Data acquisition and recording | Adjustable |
ISWS interface(optional) | Ethernet |
GSM modem (optional) | |
Remote failure control RS-485 | |
Monitoring programme | |
External measurements | 2 analogue inputs for monitoring(optional) |
Digital inputs/outputs | |
Safety | |
Applicable European standards | EN 61000-3-2 |
Electromagnetic compatibility directive | UNE-EN 612777 |
EN 6(Immunity standard) | |
Low voltage directive | UNE-EN 50178 |
