Features:
This product is specially developed for the high-level external wall putty in order to apply the high-level wall putty market, provides a flat base surface and has strong adhesive force to the coating
1, strong cohesive force, can be well attached to the wall and coating
2, good thixotropic, can obtain the perfect almost smooth surface by simply disappearing, reduce damage caused by paint due to the uneven surface
3, good anti-crack function
4, good damp-proof function and ventilation can keep the wall and the painting dry
5, good flexibility, can resist the damage of temperature, guarantee the long-term decoration effect of the painting
6, texture of nature, ensure the decorative paint effects can be completely reflected
Application:
1, the paint bottom ash for both new and old walls
2, the paint bottom ash for old base surface (paints, tiles, mosaics, stone and other smooth surfaces)
3, more suitable for the imitation aluminum, metal lacquer and other grass-roots putty
Operation Process:
1, the ratio: powder: water: additive: 8: (2~2.8): 1(25kg powder: 5kg water: 2.0kg additive)
2, the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
3, if the wall is too dry, wet the wall before operation till there is no obvious water on the surface
4, pouring the water into the stirring barrel, adding the powder slowly, stirring them into particle paste with no powder no deposition, using inserting tools to batch, after 4-6h of the first insert can make the second time, polishing the lacquer putty layer, control the thickness between 0.8~1.5mm
5, during the insert process, pay attention to the even and flaws
6, when finishing the putty, according to the weather to polish within 1~2 days
7, after 7 days of the inserting putty, can paint other coatings, for the alkali resisting primer the time can shorten
Technical Reference:
Shrinkage(%)≤0.5MPa | Compression and shear bond strength≥1.5MPa | Waterproof pressure strength≥1.2MPa |
Tensile strength resistance to temperature≥1.2MPa | Tensile strength resistance to freezing and thawing≥1.0MPa | Resistance to artificial aging strength(1000h)≥0.5MPa |
Normal Amount:
Thickness under 1.5mm, about 1.8~2.5kg/m2
Cautions:
1, make sure the smooth and vertical rate of the surface before operation
2, never mix the dry slurry with water and use again
3, the mixed lacquer putty should be used up within 3h
4, this product requiring operating under 5℃~40℃ situation, never operate under raining.
5, when finishing the lacquer putty layer, finish the polishing within 7 days or it will be difficult for later polishing, nursing for 2~3 days by watering can gain a better effect for the layer hardness
6, for the uneven surface, suggesting dealing it with base lacquer putty before the repair lacquer putty
Store Method:
Store in cool and dry place, unopened product can be saved for one year.
Packing:
25kg powder + 2.0kg additive/set
