TMS374 immo emulator:
Emulator immo TMS 374 enable to take off immo permanently.
Use:Citroen, Peugeot Engine Control Module with processor TMS 374:
- Sagem SL96
- Magnetti Marelli 1AP20, 1AP40, 1AP41, 1AP43, 1AP80, 1AP81, 1AP83, 1AP90
Reanult Engine Control Module with processor TMS 374:
- Siemens Fenix 5
- Sagem Safir 1
- Sagem Safir 2
MB immo emulator CR:
The unblockers for Mercedes - CR replace the broken Immobilizer or the car key .
Use:
Immo on Infrared, canister 12 pin + 2 pin CAN but only L occupied (CAN H empty) diodes blink green and red in mirror:
- 2,2 Diesel Lucas 1996
- 1,8 - 20, - 2,3 gasoline control module (hybride) Siemens
VW immo emulator:
The emulator immo VW without CAN – replace broken immobilizer or the car key.
Self-learning of computer code – connected and it work.
Use:
AUDI, SEAT, SKODA, VW - systems W1,W2 to 200(Electronic Control Module EDC15 and 5 plugs LT28, LT 35 -when ECU don't have written chassis number -up to 2006).
The emulator work in a Ford gasoline and diesel systems VW (with logo VW on ECM)
FIAT immo emulator:
The unblockers for Alfa, Lancia, Citroen, Fiat, Peugeot replace the broken immobilizer or the car key. They function after the changes in memory.
Use:
- CITROEN, FIAT, PEUGEOT JTD with Immo Driver 2 plugs
- ALFA, LANCIA, FIAT, 1,9 JDT 2,4 JDT with Immo Driver 5 plugs
- IAW49F FIAT Bravo 1,6 16V
- IAW 4AF FIAT Seiciento, Panda 1,1 8V
- Lancia Kappa 2,0 i 16 V Turbo 0 261 203 792
- Lancia Kappa 2,0 i 20 V 0 261 203 670
- Lancia Kappa 2,4 i 16 V 0 261 203 669
DAEWOO immo emulator:
The unblockers car Daewoo replace factory immobiliser or key.
Use:
- ECM of white-red plug with processor Motorolla HC11F1
- blue plugs with processor Motorolla HC11F1
MATIZ immo emulator:
Emulators immo Matiz replace broken immobilizer or the car key.
Self-learning of computer code – we connect and it works.
Use:
- Matiz Engine control module SIEMENS
- Tacuma Engine control module KEMSCO
- Lanos Engine control module 1,4 OHC hybride
SUZUKI immo emulator OKI:
Emulators immo Suzuki – OKI replace broken immobilizer or the car key. They function after the changes in memory.
Use:
Engine Control Module with memory OKI
OPEL immo emulator:
Emulators immo for Opel cars replace broken immobilizer or the car key. They function after the changes in memory.
Use:
- ECM 1,2 - 1,4 gasoline with two black plugs and processor Motorolla HC11E20
- ECM 2,0 and 2,2 gasoline with memory eeprom 24c02 : 0 261 203 629 ; 0 261 203 548 ; 0 261 203 630
KIA immo emulator:
Emulators immo Kia, Mazda replace broken immobilizer or the car key.
Self-learning of computer code – we connect and it works.
Use:
- Kia Sportege 2,0 Td
- Mazda 2,0 Td
RENAULT immo emulator NEW:
The unblockers for Renault cars replace broken immobilizer or the car key. They function after the changes in memory.
Use:
- Syrius 32 without CAN
- Syrius 34 1,4 1,6 and 2,0
- EMS 3132
- 1,9 and 2,2 DCI without CAN
- 1,5 DCI without CAN
- 1,9 Dti 1 plug
- 1,9 Dti 2 plugs
- 1,9 Diesel DCU3
- 2,8 Td
Renault immo emulator:
After decoding of Renault injection computer using RENAULT RESET TOOL or by entering security code, in most cases you can start engine, but some of injection
computers can not operate without immobiliser code stored in their memory.
Diesel EDC15C3, DCU3R and MSA15, petrol SIRIUS32 (except those for 1.4L( engine) and FENIX5 for 2.0L 16V engine require working unlocked (with good key)
immobiliser unit or Renault immobiliser emulator. Use together with RENAULT ECU DECODER for a complete kit.
Yamaha immo emulator:
The emulator of an immobilizer for motorcycles and scooters Yamaha.
Works with all motorcycles and scooters Yamaha from 2006 to 2009.
Does not demand programming only need is connect wires.
Completely emulates work of a regular immobilizer, including light-emitting
diode work on the instrument panel.
For emulator installation in the case of a regular immobilizer:
1. Remove glue hermetic from the immobilizer case.
2. Take out a PCB from immobilizer and desolder from it wires.
3. Connect the emulator according to drawing more low.
4. Insert the emulator into the immobilizer case.
Colouring of wires and their appointment:
Colouring of wires and their appointment:
Black (2 pcs.) GND
Red BATT (+12v)
Yellow IGN (+12v)
Gray LED (+5v)
Blue K-line Immo-ECU
