GTD Series CNC plasma cutting machine is a hardware and software in the absorption of foreign advanced technology, processing and supporting metal structure of a self-developed high-efficiency automatic cutting steel cutting equipment, cutting the vertical and horizontal lines can also be roundarc curve in any direction cutting, cutting surface roughness and high precision, small deformation.The machine has reasonable structure, simple operation, advanced technology and so on.
GTD series cutting machine comprises a CNC system, drive systems, control systems, mechanical systems, air system.The machine is mainly used for sheet metal flat plasma cutting various shapes, full-featured, high degree of automation, advanced configuration, cutting, high precision, good quality, dynamic stability.CNC system, servo system uses the internationally renowned brands, performance products, convenient user interface, friendly operation, rich software and high-quality hardware configuration, a full range of protective measures to provide users with a high-quality products.
GTD series cutting machine comprises a CNC system, drive systems, control systems, mechanical systems, air system.The machine is mainly used for sheet metal flat plasma cutting various shapes, full-featured, high degree of automation, advanced configuration, cutting, high precision, good quality, dynamic stability.CNC system, servo system uses the internationally renowned brands, performance products, convenient user interface, friendly operation, rich software and high-quality hardware configuration, a full range of protective measures to provide users with a high-quality products.
Plasma cutting machine
Basic function:
Rail Spacing | 2000mm |
Rail Length | 6000mm |
Drive Mode | Bilateral drive |
CNC System | Shanghai Jiaotong University Industrial Control System |
Console position(confirmed before the order) | Left Operation |
CNC Plasma Cutting Torch | One group |
Move torch body | One group(CNC) |
Horizontal transmission line | Towline |
Vertical transmission pipeline | Towline |
Plasma cutting power supply(model available on request optional) | Taiwan Plasma AP-100A |
Electrical cabinet | Electrical cabinet (some of the imported configuration) |
Functional configuration:
Automatic arc voltage increase | HYD (1 SET) |
Nesting software programming | 1 SET |
Technical index
Effective cutting width | 1500mm |
Effective cutting length | 3000mm |
Air-way speed | 0-8000mm/min |
Plasma cutting material Plasma cutting thickness of perforated steel | Carbon steel, stainless steel 15mm |
Plasma duty cycle | 100% |
Plasma cutting thickness of the steel edge of the start | 25mm |
Plasma cutting thickness of perforated stainless steel | 15mm |
Plasma cutting edge of stainless steel thickness | 25mm |
Down from the cutting torch | ≤150mm |
Standard machine precision | JB/T5102-1999 |
Automatic lift precision | ±0.5mm |
Linear positioning accuracy | ±0.5mm/10m |
Linear Repeatability | ±0.5mm/10m |
Speed error | ±5% |
Cutting roughness | Ra≤12.5μm |
Working Condition:
ambient temperature | -10℃~+40℃ |
relative humidity (RH) | ≤95% no condensing |
Surrounding environment | Ventilation, no greater impact |
Mains voltage | 220V/3×380V±10V |
supply frequency; mains frequency | 50Hz |
The input power (the machine parts) | 3-5KW |
Plasma power supply capacity | Above 15KW |
Plasma cutting gas | As different size plasma equipped |
Plasma protection gas | As different size plasma equipped |
Plasma cutting gas source requirement | Dry, no oil, no water Pressure: 1 Mpa, flow rate: 0.3 m3 / min |
Plasma cutting gas source requirement: 1oxygen 2 nitrogen 3 compressed air | oxygen:Purity: 99.95%, pressure 1Mpa, flow rate5m3 / h nitrogen :99.95% pressure, 1Mpa,flow rate10 m3 / h compressed air:99.95%, pressure 1Mpa, flow rate5m3 / h |
Flame cutting gas (in need before delivery to determine) | Oxygen and acetylene or oxygen + propane |
Oxygen inlet pressure | 0.8-1.0MPa |
Gas inlet pressure | 0.04~0.06MPa 0.08~0.1MPa |
The Lord list
CNC System
Shanghai Jiaotong University Industrial Control System
1 set
With plasma cutting machine power supply
Taiwan Plasma AP-100A
1 set
CNC cutting torch lifting devices
German technology
LZ-200III
1 set
Automatic arc pressure ShiDiao high device
HYD
XPTHC-300I
1 set
Plasma cutting torch prevent collision
JinRunJi
Each 1 set
Horizontal servo drive
panasonic
1 set
The longitudinal servo drive
2 set
Horizontal drive servo motor
1 set
Driving longitudinally servo motor
2 set
Horizontal planet reducer
Germany
1 set
Vertical planetary reducer
NEUGART
2 set
Programming set of material software
Australia FASTCAM standard edition set of material software
1 set
The main electrical components
Japan OMRON China chengtai
1 set
display
PHILIPS
1 set
Horizontal drag chain
IdeaTech
1 set
Longitudinal drag chain
IdeaTech
1 set
Motor cable
Germany IGUS
Each 1 set
Rail System
24kg,Each vice: 2 root * 2 meters/root
3 vices
technical documents
Name | Quantity |
Packing List | 1 set |
The machine instructions | 1 set |
The operating system servo system operation manual and plasma power manual | Each 1 set |
Electrical diagrams | 1 set |
Product quality certificate | 1 set |
Random spare parts
Name | Qantity |
The fuse: 2 A and 6 A | Each one set |
M6 M8 hex wrench | Each one set |
Plasma vulnerable parts: according to relevant the type of plasma we provide supporting original | one set |
