Mechanical Analytical Balance

Analytical balance, for industrial and mining enterprises, medical, scientific research institutions, universities, laboratories, laboratory and other industries for precision balance
Volume determined.
Advantages: used in all gem blade, shim, to improve measurement accuracy, a higher life.
Model weighing (g) sub-scale value (mg), said disc diameter (mm) Dimension (cm)
Model Weigh Capacity (g) Gradation Value (mg) Diameter of Pan (mm) Dimensions (cm)
TG328A 200 0.1 75 39 * 30 * 44
TG328B 200 0.1 75 39 * 30 * 44
TG528B 200 0.4 75 39 * 30 * 44
TG628A 200 1 75 39 * 29 * 49
TG928A 200 1 75 42 * 29 * 47
Mechanical analytical balance TG628A key steps:
Adjust the balance level balance of the foot pad test whether the level of screws? (The level meter on the scale with a floor fitter point of view) will be riding on the tour code marker 0 on the open balance, whether within about 1 minute degree, if not, adjust the screws on both sides of record stop-point, such as the 10.1 recovery, re-affirmed stopping point, see if the balance is stable, such as 10.2 , plus the weight, chip code,, big to small, eclectic intercept (eg, less than 0.5g 1.0g, plus 0.3g,) recording stop point such as 10.5, the left and right within a grid, is considered a balance, so you can accurately estimate if you want to 1mg 0.1mg, 1mg plus rider, but also measured the amount of sense at the time.
Note:
1, light debug: Plug in power after mechanical analytical balance, the balance of the disc still can be seen when the optical display of the ruler, zero transfer time should be closed, open to see results, so the cycle repeated adjustment.
2 If the bottom of the stick can not be adjusted to zero, to rotate the beams on the two screws holding the card when the balance knob disk should be the biggest hit, found the biggest hit when the balance plate was resisted ( dynamic part of your balance and a fixed part of a local contact, you look at the two dampers, where the most prone to scratching).
3, with particular attention to protecting the agate knife