Technical Parameter
Specification | UW-10 | UW-15 | UW-20 | UW-25 | UW-35 | UW-40 | UW-50 |
Material of Body | Brass | ||||||
Operating Method | Film Pilot | ||||||
Pipe Size | G1/2 | G1/2 | G3/4 | G1 | G1-1/4 | G1-1/2 | G2 |
Nominal Diameter (mm) | 16 | 16 | 20 | 25 | 35 | 40 | 50 |
Applicable Fluid | Air. Water. Oil. Steam | ||||||
Pressure Range | 0~1.0Mpa | ||||||
Applicable Temperature | 0~100'c | ||||||
Specified Voltage | AC12V. AC24V. AC36V. AC110V. AC220V. AC380V. DC12V. DC24V | ||||||
Operating Voltage Range | ±10% | ||||||
Min.Activating Time | 0.05S | ||||||
Install Method | Horizontal Fixing |
Working medium : air,water,oil,gas
Motion Pattern : Direct Drive Type
Type : Normal Close Type / Normal Open Type
Aperture of Flow Rate : 35mm
Joint Pipe Bore : 1-1/4"
Motion Pattern : Direct Drive Type
Type : Normal Close Type / Normal Open Type
Aperture of Flow Rate : 35mm
Joint Pipe Bore : 1-1/4"
Operation Fluid Viscosity : below 20 CST
Working Pressure : Water/Oil :0~5 kgf/cm2 , Air /Gas:0~7 kgf/cm2
Max.Pressure Resistance : 10.5 kgf/cm2
Operating Temperature Range : -5~180℃
Voltage: DC12V,DC24V,AC12V,AC24V,AC36V,AC110V,AC220V,AC380V
Voltage Range : ±10%
Material of Body : Brass
Material of Oil Seal : NBR , EPDM , VITON