Corrugated pipe production line

PE/PP/PVC Single Wall Corrugated Pipe Extrusion Line Production introduction:

PE/PP/PVC Single Wall Corrugated Pipe Extrusion Line shall be used to produce small diameter single wall corrugation pipe in PVC,PP and PE raw material.

Plastic single-wall corrugated pipes produced by this single wall corrugated pipe machine have many features such as high intensity, good flexibility,high temperature resistance, resistant to corrosion and abrasion, etc. They has large market which are widely used in the fields of auto wire, electric thread-passing pipes,protective pipes of lamps and lanterns wire, circuit of machine tool, tubes of air conditioner and washing machine and so on.
Molding corrugation pipe with smooth inside and outside surface,and even ripple at one time by corresponding die; Used as wire and cable passing pipe ,washing machine drain pipe,dust collector pipe and ventiduct; Small size corrugation pipe of 4-6.7 are used in car.
PE/PP/PVC Single Wall corrugated pipe production line consists of Extruder, Mold Blocks, Corrugated Forming Machine, Cooling Equipment,Counting Machine and Auto winding system. It can continuously produce many kinds of diameter single wall corrugated pipe in high speed.

Keywords: pp single wall corrugated pipe production line, pe single wall corrugated pipe production line, pvc single wall corrugated pipe production line, pp single wall corrugated pipe extrusion line, pe single wall corrugated pipe making machine, pvc single wall corrugated pipe extrusion machine.

Spections of the corrugated pipe production line:

• High      precision and character for forming machine and head die.

• Water and      wind cooling for module

• On-line      belling

• Unique      digital control system

• High      automatic, high output, stable production condition.

• Easy      operation methods, and high technical automatic 

• Competitive      price with nice after-selling service

• Durable using      life

 

Single Wall Corrugated Pipe Production Line
Extruder types	BAXSJ-65/25	BAXSJ-90/25	BAXSJ-120/25
Range of Pipe Dia.	Φ16-50 (mm)	Φ65-115 (mm)	Φ115-175 (mm)
Water Consumption	2000 (L/H)	4000 (L/H)	5000 (L/H)
Water Pressure	0.4-0.6 (Mpa)	0.4-0.6 (Mpa)	0.4-0.6 (Mpa)
Number of Mold Blocks	40 (Pairs)	50 (Pairs)	60 (Pairs)
Total Length of Mold Blocks	2400 (mm)	5180 (mm)	6216 (mm)
Speed of Mold Blocks	1-8 (m/min)	1-12 (m/min)	1-8 (m/min)
Dimensions(L×W×H)(Approx)	10×1.25×1.5(M)	18×1.35×1.7(M)	21×1.55×2.2(M)
Total Weight (Approx)	3 (Ton)	6 (Ton)	9.5 (Ton)

PVC Double-wall corrugated pipe is one kind of outer annular corrugated, smooth wall structure of a new plastic pipe.Compared with metal, ceramic, concrete and other pipes, double-wall corrugated pipe has many advantage such as lower weight, lower cost, erosion resistance, smooth inside-wall, high intensity, abrasion resistance, easy connection and so on. Its weight was significantly lower than the flat-wall pipe or concrete pipe, and connection, construction convenient, the cost of a significant reduction in pipe and increase the market competitiveness of the pipe. So it is used widely for sewerage and drainage system(larger diameter), cable protection system(smaller diameter), etc.
Features of this corrugated pipe extrusion line:
PVC double-wall corrugated pipe production line is configured with high-efficiency single screw extruder, laminar flow distributor, dual passage spiral composite extrusion die, corrugated forming system, spray cooling water tank, cutting unit and stack unit.
High performance single screw extruder with special screw and grooved feed barrel can ensure good extrusion in high efficiency.
The extrusion die surface is nitrided and polished. A wall thickness-regulating device is equipped in die lip to be suitable for production of different raw materials and ring resistance material. Special structure die make the thickness of the inner and outer wall even, and stable molding. In addtion, it has unique water cooling structure inside and close air flowing structure.
The shuttle corrugated forming system ensures high efficiency extrusion of high quality pipe. The special aluminum alloy mould bolck with anti-adhereing treatment, cooling air, cooling water and vacuum channel inside of mould block ensure good forming structure of pipe and fast cooling speed. Advanced online belling system lowers the investment and increase the efficiency. In addtion, the forming systme is provided with self-protection device for sudden power cut.
Special aluminum alloy mould block with anti-adhering treatment; cooling air, cooling water and vacuum channel inside of mould block ensure good forming structure of pipe and speed.
The cutting unit can cut pipe in right position by tracking switch. The high quality alloy knife and clamp tools can satisfy different cutting.
The line adopts OMRON or MITSUBISHI PLC computer control system with touch screen interface, which guarantee automatic and reliable operation.