Using Way:
mainly used to clean the uncured foam in the spray gun,
the interior of hose and the surface of other things
If the foam has cured, please clean it by mechanical method
This is GUN:
Usage direction
1. After using Shuode Polyurethane Foam Adhesive, please follow the below steps: first, take the can off spray gun; second, screw the accessory nozzle on the valve, then place the cleaner can upside down and press the nozzle, spray the cleaner to clean the uncured foam on the exterior of the spray gun and in the adapter.
2. Fix the cleaner can on the spray gun as soon as possible.
1. After using Shuode Polyurethane Foam Adhesive, please follow the below steps: first, take the can off spray gun; second, screw the accessory nozzle on the valve, then place the cleaner can upside down and press the nozzle, spray the cleaner to clean the uncured foam on the exterior of the spray gun and in the adapter.
2. Fix the cleaner can on the spray gun as soon as possible.
3. Pull the trigger a few times, in order to completely clean the interior of spray gun.
4. Clean the place where need to be cleaned.
5. After cleaning, clockwise shut down the flow control valve.
6. To clean or wipe off the uncured foam, please consult step 1.Attentions:
1. When operating, please wear appropriate protective clothing, gloves and goggles.
2. Ensure good ventilation at workplace.
3. If accident happens and feel unwell, please seek medical advice as soon as possible.
1. When operating, please wear appropriate protective clothing, gloves and goggles.
2. Ensure good ventilation at workplace.
3. If accident happens and feel unwell, please seek medical advice as soon as possible.
Security Suggestions: :
Keep out of reach of children. Avoid direct sunlight and do not expose to temperature exceeding 50 °C. Do not pierce or burn, even after use. Do not spray into a naked flame or any incandescent object. Keep away from sources of ignition – no smoking.
.jpg)
