hydraulic swing beam shear

The performance of this kind of metal sheet cutting machine (hydraulic shearing machine):
1. The frame is steel-welded construction, vibrating to eliminate stress, with high strength and good rigidity.
2. The sheet is moved easily by the rolling balls and the support block located on the table to ensure the surface quality of the sheet to be cut. There are front support arms and side squaring arm.
3. Hydraulic drive, swing beam, the return of the knife beam is smooth and prompt by the accumulator or nitrogen cylinder...
4. The stroke of knife beam can be adjusted steplessly for promoting production on the strip cutting.
5. The position of low blade can be adjusted to ensure the equilibrium of the gap between blades after regrinding.
6. Adjusting of the gap between blades is portable and prompt. The value of the gap is indicated on a dial.
7. The back gauge is motorized adjustable and manual fine adjusted. The adjusted value is shown on the numerator on the front of the machine.
8. The cutting times are shown with the counter on the front of the machine.
9. Equipped with lighting-alignment device. Protective fence and the safety interlocker to ensure the operation safety.

Optional:
Pneumatic sheet support.
Any tailor-made are available on request.