MP2S (mPCIe SSD to PATA / SATA adapter ver1.0b)
Introduction:
MP2S is passive adapter design for Desktop SSD solution. that converts custom mPCIe SSD to SATA/PATA connector on main-board.
The adapter will allow you to use mPCIe SSD card as a hard drive on your PATA/SATA motherboard.
The adapter will allow you to use mPCIe SSD card as a hard drive on your PATA/SATA motherboard.
- Features
- allows user to use custom mPCIe SSD to PATA/SATA connector in the Desktop.
- Compatible with MINI PCI-E SSD Module of ASUS EEEPC.
- Support SATA and PATA interface.
- Power LED. PATA active LED.
Notice:
The SSD module is controlled via the PATA or SATA interface to the main-board. And not the PCIE bus or USB port. It only requires power from the PCIE bus or USB port or Floppy connector. As a result PCIE/USB connector existing nets on the PCB which are power connecting only.
Almost mPCIe SSD just only support master mode. So please setting your another IDE device on slave mode if you have. Such as HDD/CD-ROM.
The SSD module is controlled via the PATA or SATA interface to the main-board. And not the PCIE bus or USB port. It only requires power from the PCIE bus or USB port or Floppy connector. As a result PCIE/USB connector existing nets on the PCB which are power connecting only.
Almost mPCIe SSD just only support master mode. So please setting your another IDE device on slave mode if you have. Such as HDD/CD-ROM.
System Requirements
- Windows 2000, XP, Vista,Windows 7, Server 2008
- Linux
