Benifits from using Super fuel max
1. Up to 30% Increase in Engine Life
2. Up to 50% Reduction in Carbon monoxide and Hydrocarbon
3. Up to 10% to 22% Fuel Savings
4. Does NOT void vehicle warranty
5. Works on all vehicle including diesel
6. Save Up to $500 to $1, 500 a Year and more
7. No cutting of the fuel line
8. Up to 10 Horse Power Increase
9.0% Maintenance for Life
10. Less Than 5 Minute to Install
Products Details:
Size: 27x32x27 mm
Color: Yellow
Net Weight: 40 g per unit
Inside Magnetic power: 12000 gauss
Packing: 1 unit per blister, 200 blisters per CTN
CTN Size: 60x35x28 cm
Gross Weight: 15 kg
HOW DOES SUPER FUEL MAX WORK?
Untreated Fuel molecules tend to "clump" together due to attraction between molecules with charges of opposite polarities. This causes an inefficient burn. As a result, your engine experiences loss of power, lower gas mileage and lots of carbon build-up. Super fuel max's powerful magnetic field causes these "clumps" of fuel molecules to be charged with a single polarity, thus they repel each other making the fuel disperse more efficiently causing more complete combustion and power production. Turbomag will actually remove the existing carbon build-up in your engine - this usually takes an average of 3 tanks full of gas, followed by a dramatic increase in gas mileage and horsepower.
Installing SUPER FUEL MAX
1. Locate the fuel supply line under pressure feeding the engine from the fuel tank Vehicles with fuel injection engines normally have two lines running parallel between the fuel tank and the engine, a supply line and a return line. While the engine is running, feel the lines and the colder one of the two will be the supply line.
2. Insert the nylon tie through the grooves that have the tie retainer slot. This is to help hold the tie in position while applying the fuel saver to the fuel line
3. Simply place Super fuel max over the fuel supply line, at the accessible location as close to the carburetor or fuel injection system as possible. However do not install super fuel max in close proximity to the alternator or any electromagnetic energy source. Installation on a metal line has given the best performance. In some cases there has been somewhat less effectiveness on plastic and rubber. We believe better radiation can be achieved through the metal; While we have had good positive results on all materials, if you can choose a metal fuel line even if it is a connector before the carburetor etc. Do not install the device on braided metal fuel line.
Production Time: 8-10 days
Please feel free to email us, and we will send our more products details for
1. Up to 30% Increase in Engine Life
2. Up to 50% Reduction in Carbon monoxide and Hydrocarbon
3. Up to 10% to 22% Fuel Savings
4. Does NOT void vehicle warranty
5. Works on all vehicle including diesel
6. Save Up to $500 to $1, 500 a Year and more
7. No cutting of the fuel line
8. Up to 10 Horse Power Increase
9.0% Maintenance for Life
10. Less Than 5 Minute to Install
Products Details:
Size: 27x32x27 mm
Color: Yellow
Net Weight: 40 g per unit
Inside Magnetic power: 12000 gauss
Packing: 1 unit per blister, 200 blisters per CTN
CTN Size: 60x35x28 cm
Gross Weight: 15 kg
HOW DOES SUPER FUEL MAX WORK?
Untreated Fuel molecules tend to "clump" together due to attraction between molecules with charges of opposite polarities. This causes an inefficient burn. As a result, your engine experiences loss of power, lower gas mileage and lots of carbon build-up. Super fuel max's powerful magnetic field causes these "clumps" of fuel molecules to be charged with a single polarity, thus they repel each other making the fuel disperse more efficiently causing more complete combustion and power production. Turbomag will actually remove the existing carbon build-up in your engine - this usually takes an average of 3 tanks full of gas, followed by a dramatic increase in gas mileage and horsepower.
Installing SUPER FUEL MAX
1. Locate the fuel supply line under pressure feeding the engine from the fuel tank Vehicles with fuel injection engines normally have two lines running parallel between the fuel tank and the engine, a supply line and a return line. While the engine is running, feel the lines and the colder one of the two will be the supply line.
2. Insert the nylon tie through the grooves that have the tie retainer slot. This is to help hold the tie in position while applying the fuel saver to the fuel line
3. Simply place Super fuel max over the fuel supply line, at the accessible location as close to the carburetor or fuel injection system as possible. However do not install super fuel max in close proximity to the alternator or any electromagnetic energy source. Installation on a metal line has given the best performance. In some cases there has been somewhat less effectiveness on plastic and rubber. We believe better radiation can be achieved through the metal; While we have had good positive results on all materials, if you can choose a metal fuel line even if it is a connector before the carburetor etc. Do not install the device on braided metal fuel line.
Production Time: 8-10 days
Please feel free to email us, and we will send our more products details for
