Quick Exhaust Valve usually do not work independently. These valves normally work together with the controlling valves in the pneumatic systems. It gives supportive help for the controlling valves, so that the complete controlling system can be finished very well.
This valve is generally installed in the pipeline between the cylinderand change valve and close to the cylinder to enable the cylinder to directly discharge the air without the necessity to go through the change valve and so as to achieve the aim of fast reversing of the cylinder.It has especially obvious effect on rasing the movement speed of thd cylinder.
P.Connect thd change valve for output
A.Connect thd cylinder
R.Connect thd muffler
| Joint Threaded | G1/4 | G3/8 | G1/2 |
| Joint Pipe Bore | 6mm | 8mm | 15mm |
| Flow | ≥0.9m3/min | ≥2.5m3/min | ≥4.5m3/min |
| Timerate(Ten Thousand Times) | ≥200 | ||
| Working Pressure Range | 0.12~1.0MPa | ||
| Exchange Times(s) | ≤0.03 | ≤0.04 | ≤0.05 |
.jpg)
.jpg)
