Stainless Steel

Size
1/4" NB - 24"NB
Sch
5, 10, 40, 80
Specification...

All Stainless Steel pipes are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government

Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506

Hardness and tensile strength can be increased by cold work
Cold working may cause slight magnetism
Good wall tolerance and straightness tolerance

Size: 1/2"-72"
Wall Thickness: SCH10S-SCH160, STD, XS, XXS
Type: ERW, LSAW, SSAW, EFW
Length: 1-12 meter
Pipe End: BE, PE, Threaded.

(1/8"IPS to 36"IPS)SS 304,316&other 300series alloys plus unlisted intermediate walls,annealed temper.Please call to confirm available alloy selection

All stock of Welded Pipe, standard piping is ordered in accordance with ASME/ASTM SA/A312 with dimensions and weights in accordance with ASME B36.19.

Advantages of austenitic stainless steel:
Excellent formability
Excellent corrosion resistance
Toughness at low temperatures
Good weldability

The offered range of welded pipe is made utilizing high grade raw material and innovative techniques in strict compliance with the quality norms

Stainless Steel Pipe Polishing
180G/320G/400G/ 600G Mirror Polishing
Stainless Steel Pipe Beveling
Heat Treatment, Annealing, Pickling

GANYEAH Steel is supplying stainless steel welded pipes as per ASTM A312 in common grades such as 304/304L and 316/316L in standard pipe sizes

We can help supply all of the ASTM A312 Stainless Steel Pipes, A312 Seamless/Welded Pipes for use in the oil or natural gas industries.

Stainless steel plate is often referred to as corrosion-resistant steel -it does not stain, corrode or rust as easily as normal carbon steel

SUS304:C≤0.08 Si≤1.00 Mn≤2.00 P≤0.045 S≤0.03 Ni8.00-11.00 Cr18-20
SUS316L:C≤0.03 Si≤1.00 Mn≤2.00 P≤0.045 S≤0.03 Ni12.00-16.00 Cr18-20 Mo2-3

EN 10296-2 Non-destructive testing of the weld is not mandatory. This gives a possible design utilization of 70%, and a weld factor z = 0.7.

Type 304 and 304L grade of pipe exhibit good machinability and have excellent weld-ability characteristic with or without the addition of filler metal

Hardness:Resistance to deformation or indentation. Materials with little resistance are called soft; and those with high resistance are called hard.

Our tubing is made from cold rolled stainless steel strip whose chemical elements are specially controlled to enhance weldability.

To achieve the desired interior surface finish, an abrasive material, fitted onto a pneumatic polishing head, rotates within the tube for many cycles.

Available mechanically polished to 20 μ-in Ra (0.5 μm) maximum ID and 30 μ-in Ra (0.8 μm) maximum OD surface roughness, exceeding ASTM A270-S2