Valves

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Model NO.: OVWD62(6, 8, 7)1X
Connection Type: Welding
Valve Body:Forge Welding
Driving Mode:Pneumatic
Material of Seal Surface: Soft Sealed

Code:HC9007
Material:Brass HPb57-3
240g lpg gas valve lpg bottle valve
Outlet Thread:NGT1/2,3/4"
certificate: ISO9001

We are a very professional and big-scale enterprise that mainly manufactures brass manifolds, brass ball valve, brass radiator valve, brass angle valv

The mainly products are Hand-control Valve,Pneumatic Control Valve,pneumatic
accessories,one-way throttles,direction valves,and so on

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
Pressure Range: 30(5)-860(125) kPA(Psi)

Our company products, solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 standard.

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Double Acting Spring Return Pneumatic Wafer Butterfly Valve
Double Acting or single acting model
Rack & pinion design

These closed center valves have a 90° lever movement. In neutral position, the inlet is closed to pressure and outlets are closed to exhaust.

1. Ordering Code: SCG353A047
2. Valve type: Diaphragm valve
3. Working pressure: 4-6 Bar
4. Port: 1.5"

1. Simple structure
2. Low cost and economic shut-off valve
3. Only a 3/2 way solenoid valve is requested to control the pinch valve

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

Power consumption AC: 3.5VA DC : 3.0W
Scope of voltage: AC: ±15% DC: ±10%
Protection :IP65 ( DIN40050 )
Activating time:0.05 sec and below

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods