Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

electric damper electric butterfly valve electric ball valve Dn50-DN2000mm PN 1.6Mpa 4.0Mpa 6.4Mpa o.5Mpa Material: at buyer's option

Type: CQ012
Material: Stainless steel
Surface treatment: according to the customers' requirement.
We can provide for non-standard hardware parts.

Material: ASTM A182 F316L
Type: valve seat ring, semi-finished
Size: 2-36 inch as per drawing
Certificate: MTC or 3.1 certificates

24V air gas valve electric solenoid water valve
Media: Water, Air, Oil (below 20cst
Temperature: -5 ~80
Pressure: NC,12bar; NO, 8bar
Sealing: NBR

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Model NO.: OVWD62(6, 8, 7)1X
Connection Type: Welding
Valve Body:Forge Welding
Driving Mode:Pneumatic
Material of Seal Surface: Soft Sealed

Sanitary butterfly valve/butterfly valve/valve
Size:usually 1"-4",any size is demandable
Material:SS304/SS316

Knife gate valve is also called knife gate valve, knife gate valve, slurry valve and mud valve. Its opening and closing parts are gate valves.

Motorized Actuated Double Union PVC Ball Valve
On/off, modulating 4-20mA control
Compact or explosion-proof actuator
IP67 weatherproof

It has the capabilities of anti-wear, corrosion-resistant, high-temperature resistant, as well as high hardness, high toughness

1.Materal body:2W:Bross;2S:stainless steel
2.Please contact factory for special voltage and specifcatin
3.Good Quick and cheap price

Nominal diameter: DN40-350mm
Nominal pressure:PN1.0-2.5MPa
Applicable temperature:0-80 Deg.c
Material:cast steel,cast iron
Medium :water

2-pc stainless steel ball valve full port,flange end PN10-40 ISO-direct mountiong pad
2pc Class 150 full Bore Floating Ball Valve (W403)
Class150

handwheel ball valve
cast steel ball valve
floating ball valve
flange ball valve

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

2PC Ball Valve
Size: 1/4 -4"
Ratting: Class150LB-1500LB
Material: WCB, LCB, CF8, CF8M, CF3, CF3M, A105, LF2, F304, F316, F304L, F316L
Design

JIS 20K Flanged globe valve
J41H-20K
Material: WCB, Forged steel, SS304 SS316 SS316L, etc.
Specifications: DN15-DN600
Standard: GB, JIS, ANSI,

1.Design and fabrication per DIN3352part4\
2.Length per GB1221-1989
3.ENds flange size per GB9113.1-2000
4.Inspection and test per GB/T 13927-1992

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.