Valves

2 way water valve normally close stainless steel SS304 2 inch VITON NPT BSP thread
2.5-50mm orifice;
2 way;
NBR ,VITON;
ss304.

auto-control solenoid valve,
Direct act
Normaly closed and Normaly open
1)body material: brass and stainless steel 304
2)three way solenoid valve

sanitary pneumatic butterfly valve 316L clamp type butterfly valve:
SS316L Sanitary pneumatic clamp type butterfly valve

small operatiton torque enhance flexibility and facilitates prompt turn on; manual operation is available

JIS Flanged ball valve 10K/20K ISO5211 Mounting pad ball valve
1. Design and Manufacture: BS 5351
2. Flange End: JIS B1212 B2214
3. Test and Insp

2 way magnetic solenoid valve water normally open 12vdc stainless steel
2.5-50mm orifice;
2 way;
NBR ,VITON;
ss304.

2S160-15 Stainless Steel Water Solenoid Valve(Large Aperture):
1. Good quality with low price
2. Hot product in the world
3. Good service

2/2 Way steam hot water oil SS304 Pilot operated Solenoid Valve
1) hot water, steam ,oil
2) ss304 and ss316
3) polot operated

Size: 1/2"~4"
Pressure Rating:PN16
Body Material: CF8, CF8M, CF3, CF3M,

2S500-50 stainless steel Solenoid Valve:
1. Good quality with low price
2. Hot product in the world
3. 100% testing
4. Good service

3/2 way new product solenoid valve, three way magnetic valve
1)body material: brass and stainless steel
3/2 sereis
normally closed normally open

short length structure can save original materialinstallation spacesupport pipe intension effectively.

Size: 1/2"~4"
Pressure Rating:PN16
Body Material: CF8, CF8M, CF3, CF3M,

short length structure can save original materialinstallation spacesupport pipe intension effectively.

auto-control solenoid valve
1)body material: brass and stainless steel
2)three way magnetic valve
IP65 water air oil G1/4" auto-control solenoid v

small operatiton torque enhance flexibility and facilitates prompt turn on

Quick twist type ball valve
put tube and male thread
size:6mm--12mm tube,1/8"---1/2"(G,PT,NPT thread)

JIS Flanged ball valve 10K/20K ISO5211 Mounting pad ball valve
1. Design and Manufacture: BS 5351
2. Flange End: JIS B1212 B2214
3. Test and Insp

Size: 1/2"~4"
Pressure Rating:PN16
Body Material: CF8, CF8M, CF3, CF3M,

Exhaust Valve,Vent Valve
1.Connections: Weld,Clamp,Thread .
2.Quality: AISI304, AISI316L
3.Size:11/2"-2"