Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Actuator: Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

The valve which is called Cast air condition valve.
The vale is widely used in automotive air conditioning

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

Pressure:We have low pressure and high pressure
Flow Media:Gas,Water,Oil

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

ZAZP series electric through single seat regulating valve is composed of a DKZ type series of straight travel electric actuator .

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

electric two seater ZAZN oxygen regulating valve 904, accept the DC current from the signal conditioning instrument, change by adjusting the media flo

Actuator Size: Φ50Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

pneumatic thin fat through engine valve dual oriented structure, equipped with multi spring actuator. Has the advantages of compact structure.

Actuator Size: Φ80 Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

1.Pilot diaphragm drive, normally closed.
2.Valve body material is SS316.
3.Can be operated directly without pressure.

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.