Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Actuator: Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

GDQ pneumatic high vacuum baffle valve relies on the electromagnetic directional valve to change the gas flowing direction

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

Item No.:ALT130
Instruction:
1)2/2NC solenoid valve armature
2)Mainly used for pneumatic solenoid valve
3)Working voltage: AC/DC

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

pneumatic thin fat through engine valve dual oriented structure, equipped with multi spring actuator. Has the advantages of compact structure.

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

Actuator Size: Φ50Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

pneumatic control valve is driven by compressed air source to the cylinder as the actuator,, and with the help of electrical valve positioner.

Actuator Size: Φ80 Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

lectric pressure regulating valve, a straight stroke electric actuator and low flow resistance through the regulating valve.

1.Pilot diaphragm drive, normally closed.
2.Valve body material is SS316.
3.Can be operated directly without pressure.

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures