brass cast bar

Continuous casting was originally developed in Europe after World War II as an alternative method of producing cast iron bar stock without patterns an

round magnets colored,block magnet,magnetic tile,super magnet,cheap magnets for sale,custom magnets,low rpm permanent magnet,magnetic rods

dc generator permanent magnet,magnets with holes,cone shaped magnet,rare earth magnets for sale,large rare earth magnets,scrap magnet,large ring

Cast Alnico magnets, which are aluminum nickel-cobalt iron alloys, are the most established and widely used magnet materials. Because of ...

Cast AlNiCo Bar Magnets,Cast alnico Cylinder magnets,alloy Cylinder magnets

Material: Alnico bar rod magnet
Grade: Alnico2,3,4,5,6,7,8,9
Size: Customized

High maximum temperature up to 550 degrees C. They are the most suitable magnets for high temperature applications

These toothed bars,applied to truck,after special heat treatment,is much more durable.

diametrically magnetized Block magnets,,promotional magnet,small round magnet,uses of bar magnet,magnets for handbags,generator magnet

This toothed bar used in some variable-ratio steering of agriculture machinery.

alnico magnets,magnet suppliers,horseshoe magnet,spherical magnets,strong magnetic strips,very strong small magnets,flat rare earth magnets

Product Advantages
Corrosion Resistance Fatigue Strength
Hardness Heat Treat Response
Machinability Reduced Scrap

Continuous cast iron bar and mechanical spare parts mentioned in this website are two of our most important business field.

Cast Iron Grate Bar

Continuous casting was originally developed in Europe after World War II as an alternative method of producing cast iron bar stock without patterns an

Continuous cast iron bar and mechanical spare parts mentioned in this website are two of our most important business field.

1. Alloy: 15%Cr, 18%Cr and 20%Cr and 26%Cr;
2. Hardness: more than HRC58;
3. Microstructure: Fine martensite + Carbide.

Chain Stopper:1. Material: Cast Steel, Cast Iron.2. Finish: Epoxy Coating.3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

 
Bar Cast AlNiCo Magnet For Magnetic Separators
 
Description:
 

Chain Stopper:
1. Material: Cast Steel, Cast Iron.
2. Finish: Epoxy Coating.
3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Chain Stopper:1. Material: Cast Steel, Cast Iron.2. Finish: Epoxy Coating.3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Chain Stopper:
1. Material: Cast Steel, Cast Iron.
2. Finish: Epoxy Coating.
3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Chain Stopper:
1. Material: Cast Steel, Cast Iron.
2. Finish: Epoxy Coating.
3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Material: Cast Steel, Cast Iron.
2. Finish: Epoxy Coating.
3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Chain Stopper:
1. Material: Cast Steel, Cast Iron.
2. Finish: Epoxy Coating.
3. BV, GL, CCS,RINA,ABS,KR,LR Cert.

Over the past forty years, Hebei Machinery has been growing steadily in terms of business scope and diversification.

Metal seated gate valve
1.Material: ductile iron GGG500/7
2.coating: fusion bonded epoxy coated
3.standard: BS5163, BS5150 BS3352

Steel 50# Rolled Railway Fish Plate Connecting Rails Cast Rail Joint Bar 
 
General Introduc

Dia 200~600mm SS347H Stainless Steel Hot Rolled Round Bars For Marine Drilling Platform
 
Specifica

Heat Resistant Cast Iron Grate Bar