cbn grinding wheel

Flap disc
fiberglass backing aluminium oxide
material A
Grit size 40-120#
sizes from 100-180mm...

Diamond Electroplated Grinding Disc
Dia: 4", 4.5", 5", 6", 7", 9"
100mm, 115mm, 125mm, 152mm, 178mm, 228mm
Grit: #40, #60

Diamond Electroplated Grinding Disc
Dia: 2", 3" 4", 6"
50mm, 75mm, 100mm, 152mm
Grit: #150

Diamond cup grinding wheel
Sizes: 100-180mm (4"-79")
Segment dimension: 20x5mm
Gringing on concrete, granite,marble, refractiry materials

Diamond cup grinding wheel
Sizes: 100-230mm (4"- 9")
Segement number: 14-36pcs
Gringing on concrete, granite,marble, refractiry materials

Diamond cup grinding wheel
Sizes: 100-230mm (4"- 9")
Segement number: 14-36pcs
Gringing on concrete, granite,marble, refractiry materials

Grinding Wheel for stainless steel
A24R
resin bonded reinforced abrasives
German MPA certificate

Grinding Wheel for normal steel
A24S
resin bonded reinforced abrasives
German MPA certificate

Diamond Electroplated Depressed Center Grinding Wheel
144 holes
Diamond grit size #120
Center Hole: 12mm

Grinding Wheel for stone and brick
C 24 R
resin bonded reinforced abrasives
German MPA certificate

Grinding Wheel for non-ferrous metal aluminium copper pit iron bronze
AC24R
German MPA certificate

Diamond Electroplated Cutting Grinding Disc
Dia: 4", 4.5", 5", 6", 7", 9"
100mm, 115mm, 125mm, 152mm, 178mm, 228mm
Grit: #40, #60

Diamond electroplated cutting and grinding wheel for Marble, Granite
Size: 4" (100mm), 4-1/2" (115mm)

Diamond electroplated grinding wheel
size: 4" (100mm), 4-1/2" (115mm)
titanium coated

Diamond cup grinding wheel
Sizes: 100-180mm (4"- 7")
Gringing on concrete, granite,marble, refractiry materials

Diamond electroplated grinding wheel
Size: 4" (100mm), 4-1/2" (115mm)
titanium coated

Cutting discs
Grinding wheel
Flap disc
Sander pad
Polishing pad

Diamond electroplated grinding wheel for Marble, Granite
Size: 4" (100mm), 4-1/2" (115mm)

Diamond cup grinding wheel
Sizes: 100-180mm (4"- 7")
Gringing on concrete, granite,marble, refractiry materials

CBN Grinding Wheel for INTERNAL Grinding Mainly used for internal grinding of hydraulic tappets, universal joint, stator and rotor

1 fast grinding speed,
2 high efficiency and less chipping,
3 minimum material deformation
4 long life

1.More sharp and efficient with a unique formula.
2.Longer service life
3.High hardness faying surface and strong homogeneity

Use CBN wheel non-circular grinding CAM, camshaft, CAM piece and pump ring
It is obvious from the example of camshaft that non-circular parts must be

1 fast grinding speed,
2 high efficiency and less chipping,
3 minimum material deformation
4 long life

1.More sharp and efficient with a unique formula.
2.Longer service life
3.High hardness faying surface and strong homogeneity

The resin bond products have the features of good self-sharpening, sharp cutting, high efficiency, low roughness of work piece surface, few heat.

Electroplated CBN grinding wheel

1.More sharp and efficient with a unique formula.
2.Longer service life
3.High hardness faying surface and strong homogeneity

1.More sharp and efficient with a unique formula.
2.Longer service life
3.High hardness faying surface and strong homogeneity

double disc, surface CBN grinding wheel diameter380-1200mm , be suitable in double side or single side grinding machine, for high precision lapping a