elastomer bellow seals

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2),

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

WB2 Elastomer Bellow mechanical seal
most common and low priced used for simple and non-critical applications
having single spring

Elastomer Bellow Seals CR70
temperature:-30℃ to +200℃
Pressure:<<0.6mpa
Speed:<<15m/s

1.Stationary Ring:ceramic/SIC/TC
2.Rotary Ring:carbon/SIC/TC
3.Secondary Seal:NBR/EPDM/VITON
4.Spring&Metal Parts:SUS304/SUS316

Elastomer Bellows Mechanical Seals

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.

ISP C2100 elastomer bllow mechanical seal
the same as the original item;

Stationary Ring:Silicon Carbide Sintered Pressureless,Ceramic(Alumina)

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

Elastomer Bellow Seal CR6
temperature:-20℃ to +120℃
Pressure:<<0.5mpa
Speed:<<10m/s
clean water, sewage water, Oil , moderately corrosive fluid

If you are used to use the die casting and mechanical seal, then our goods must be meet your requirements.
Stationary Ring:Ceramic(Alumina),Silicon

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

used in submersible pumps and multi-stage deep well pumps

1. excellent resistant-corrosion
2. high mechanical strength
3. high thermal conductivity
4.good self-lubrication,small expansion

single spring mechanical seal CR24
Equal:burgmann type MG912
with 5 kinds of lengths
temperature:-20℃ to +120℃
Pressure:<<1.0mpa...

Design features:Elastomeric bellows seal design including kinds of statconary ring , complying with DIN24960 and ISO3069 , combined with P60 , P50 ,t6

1. excellent resistant-corrosion
2. high mechanical strength
3. high thermal conductivity
4.good self-lubrication,small expansion

FBD series pump seal. Single seal . FBD mechanical seal series is uneasy to be blocked because of its
single spring structure.

Secondary Seal:Fluorocarbon Rubber(Viton),Ethylene Propylene(EPDM),Nitrile(NBR)
We can supply kinds of casting parts,mechanical seals

Single spring mechanical seal type CR560A
temperature:-20℃ to +120℃
Pressure:<<1.0Mpa
Speed:<<15m/s
media:clean water, sewage water, Oil and oth

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Equivalent to John Crane Type 502 ELASTOMER BELLOW SEALS

Because of more than twenty years experiences , we become one of the leading manufacturers of die casting and mechanical seals in China

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Elastomer Bellow Seal 301 water pump seal
temperature:-20°C to+120°C
pressure:<=0.6MPa
speed:<=10m/s

STATIONARY RING: CERAMIC/SIC/TC
ROTARY RING: CARBON/SIC/TC
SECONDARY SEAL: NBR/EPDM/VITON
SPRING&METAL PARTS: STEEL

Whether you need new seal or you have a seal to be repaired, we welcome the opportunity to help you with your rotary sealing needs.Rubber bellow seal

Elastomer Bellow Shaft Seals