elastomer bellow seals

Equivalent to Burgmann MFLWT80 METAL BELLOW SEALS ,For big compressors and industrial pumps .

Operating Conditions:
Temperature: -40℃~200℃
Pressure: ≤2.5Mpa
Speed: ≤20m/s

MFLC12 Ultra-low temperature mechanical seal
Metal bellows of aerospace grade inconel 718 material
work at minus 196 degrees in liquid nitrogen

Elastomer Bellow Shaft Seals(HXC2):
Mediums: Water, oil, weak acids, weak alkali, etc

used for s CR pump.. CR / CRI / CRN Series Vertical Multistage Centrifugal Pumps. Pump Models CR2, SEAL KIT CR10-2

equivolent to vulcan type14,142 ,143 seal. rubber bellow seal.for industrial pump, blower pump, diving pump,circulating pump mechanical seal

Operating Conditions:
Temperature:-20℃~100℃
Pressure: ≤1Mpa
Speed: ≤ 12 m /Sec Materials:
Stationary Ring: Ceramic/SiC/TC

Wave spring seals. Elastomer diaphtagm seals with very short working lenght. dimenstions to suit upper seal chamber in certain A.B.S. AF pumps.

Applications: Oil,light hydrocarbon,aromatic hydrocarbon, organic solvents,weak acids, alkali,Ammonia,etc.
Size: 16mm~100mm

Replacement AES P02/P02T/ Vulcan 20/ Burgmann MG920/D1-G50/ John Crane 2(N SEAT Roten 21. Sterling 212/ Flowserve 200. Single spring mechanical seal

Operating Conditions:
Pressure: ≤2.0Mpa(Single) ≤6.0Mpa(Double)
Speed: ≤ 23m/Sec

equivolent AES BP02, burgmann MG1S20, VULCAN TYPE1520 type seal. wide variety of stock Boot Mounted Seats.

mechanical seals` Operating Conditions:
Temperature:-20oC~380oC
Pressure: ≤2.0Mpa
Speed: ≤ 23m/Sec

John crane Teflon PTFE Mechanical SealsThis mechanical seal is one of the most commonly used for corrosion resistant pumps.

Features
Stationary bellows
Single Seal
Balanced
Independent of direction of rotation

type 1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

Applicatons:
Water,oil, and weakly-corrosive mediums

equivolent AES BP02, burgmann MG1S20, TYPE1520 type seal. wide variety of stock Boot Mounted Seats. Burgmann Mechanical Seals for Water Pumps

mechanical shaft seals JOHN CRANE 609 metal bellow for high temperature use in oil pumps and chemical pumps that we sell is of high precision.

Elastomer Bellow Seals type FBD
single -spring design.with good scalability
temperature:-20℃ to +120℃
Pressure:<<1.4mpa
Speed:<<15m/s

GW1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded,Silicon Carbide Sintered Pressureless,Ni-binder Tungsten Carbide

Because of more than twenty years experiences, we become one of the leading manufacturers of die casting and mechanical seals in china

Productivity:2000Sets/Month;Min. Order:10 set;Packing:individual packs;Transportation: by sea or by air;DeliveryDate:20days;PaymentType:TT or others;

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

WB2 Elastomer Bellow mechanical seal
most common and low priced used for simple and non-critical applications
having single spring

Elastomer Bellow Seals CR70
temperature:-30℃ to +200℃
Pressure:<<0.6mpa
Speed:<<15m/s

1.Stationary Ring:ceramic/SIC/TC
2.Rotary Ring:carbon/SIC/TC
3.Secondary Seal:NBR/EPDM/VITON
4.Spring&Metal Parts:SUS304/SUS316

Elastomer Bellows Mechanical Seals

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.