flygt pump mechanical seals

Used for Flygt pump no:2070/2102-040/3082
Supplied with removable setting clip

It replacement the original pump 3126 seals. our parts are specifically developed or selected to work perfectly in flygt pumps.

Applications: Petroleum, chemical solvents, weak and medium corrosion, etc.

OPERATING LIMITS:
1.Pressure: 1Mpa
2.Speed: 10m/s
3.Temperature: -30℃~200℃

Used for Flygt pump no:2004/2008/2012/2016/2050/2052/Ready8/Ready 12/Ready 16

replacement the original seals for pump 600/3170/3201/4670/4680. our parts are specifically developed or selected to work perfectly in flygt pumps

APPLICATION
Mmechanical seals are used in pumps, blowers, agitators, compressors, and other rotary shaft equipment.

double mechanical pump seal
OPERATING LIMITS
1. Pressure: ≤0.35Mpa
2. Speed: ≤6m/s
3. Temperature: -20℃~100℃

Replacement to:
Burgmann BT-C5.KB seal
John Crane T58B seal
Aesseal M04S seal
Sterling 259BS seal ...

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2650/3102/4630/4660/5520. 25MM MECHANICAL SEALS FOR GRIPOC PUMPS

Used in diving pumps, household pumps and blower pumps, etc.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20~100 degree celsius

Temperature:
Temperature:-30℃ to +200℃
Speed:≤15m/s

Mostly Use: internal-combustion engine cooling pump
piping pump, oil and other low corrosion mediums.
Press

replacement the original pump 2070.2102-040. 3082 our parts are specifically developed or selected to work perfectly in flygt pumps

Working Conditions:
1. Pressure: ≤ 0.5Mpa
2. Speed: ≤ 10m/s
3. Temperature: -20℃~100℃

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:20℃~20℃
Linear speed:≤15m/s

Replacement to:
Burgmann MG1 seal / MG12 seal /MG13 seal/MGS20 seal & G60 stationary
Aesseal B02/B012/B013 seal

The FT05Z is a seal, which can be categorized as a pump seal. It is an alternative to the Flygt 713 90 00, Grindex 50 420 00 (Lower Seal)

Applied for household pumps, water pumps and submerisble pumps.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20 to 100 degree celsius

Pressure:0~1.6Mpa
Temperature:-20℃~180℃
Rotating speed:≤20m/s
Medium: Oil, water, salt, base, organic solvent and so on

For blower pump, diving pump and circulating pump
Replacing the mechanical seal of John Crane 1B

Applied for blower pumps, diving pumps and circulating pumps, etc
Pressure: within 0.8Mpa
Speed: within 5m/s
Temperature: -30 to 200 degree celsius

pump seal mostly use: average corrosion mediums, such as water,
oil, weak acid,weak alkali, etc.

Die casting/Sand Casting/Investment Casting/automobile parts/Machining Parts
Applications:Clean water,sewage water,oil and other moderately corrosi

Used for the original seals for pump 605/665/670/680/3305/7050. our parts are specifically developed or selected to work perfectly in flygt pumps.

Applied for clean pumps, water pumps and submersible pumps, etc.
Pressure: within 0.5Mpa
Speed: within 10m/s
Temperature: -20℃~100℃

Replacement to:
John Crane 21 seal
Aesseal P04/P04T seal
Flowserve 110 seal
Roten 21Aseal ...

Plug-In Seal, 35mm, for pump code 2670,3153,5100.Flygt Plug-in Seals feature two independent mechanical seals mounted in a single,ready-to-install.

this mechanical `s materials is SS304 or ss316. it is very well.

Applied for water pump, household pump and diving pump, etc.
Pressure: within 1Mpa
Speed: within 15m/s
Temperature: -30 to 200 degree celsius