heating element

Single Tube Infrared Heater Lamps
1. quartz tube diameter : 23*11mm/33*15mm
2. length:1280mm
3.220v 1700w
4.reaction time : 2-4 minutes

Fast heating shortwave quartz lamps
1.Model No:SWIR10370x,10mm diameter
2.370mmOVL280mmHL,235V/1000W
3.Application:Glass Autoclave oven

features of ir lamps
1.high efficient
2.instant on and off
3.long life and consistent output
4.flexible product capacity...

Medium Wave Infrared Lamp
1.Operating temperature 900° C
2.Using Ni-Cr or Fe-Cr-A1 resistance wire as filaments
3.Response time around 1 minute

1.Wave Length - short wave 2.6-4.2um
2. Response Time : 1-2 minutes
3.Diameter:10,11,12,13,15,18,20,23*11,33*15mm
4. Applications : Glass printing

Near infrared region - short wave 0.75-1.5um
Function: Short response, Fast heating, drying and curing
Working Efficiency of Lamp : at least 83%

Glass Tube:99.9% Pure Fused Silica Quartz Sealed
Filament Material:Tungsten
Filament Temperature:1800 - 2400C℃(3300 - 4400F)
reaction time:1s

Glass Tube:99.9% Pure Fused Silica Quartz Sealed
Filament Material:Tungsten
Filament Temperature:1800 - 2400C℃(3300 - 4400F)
reaction time:1s

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000Hs
5.Max overall length: 6400mm

1. Peak Wave Lengt: 2.6-3.5um
2. Response Time : 1 minute
3.heating material : alloy wire
4.warranty time:20000Hs
5.Max overall length: 6400mm

1.Short-Wave: 200 Watts/linear in.
2.Voltages: 120VAC, 240VAC, 480VAC
3.Available with straight wire leads, quick-disconnect sockets and 90℃ leads

1. Instant heat : More than 90% emission within 2 mins
2. Clean: No byproduct, no Pullution
3.heating material : alloy wire
4.warranty time:20000Hs

Shortwave infrared heaters
Max Power density: 100W/cm
Quartz tube purity: 99.99%
Fulx density: 99%
Energy using rate: 97%

1.lead wire : Teflen , High Temperature Resistant wire
2.Installing Orientation : Horizontal / Vertical
3.6.Shapes : Tubular,U, L, Omeg, Round

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

medium wave infrared heater lamps
1.Response time is 1 minute
2. energy saving
3.warranty time : 20000 hours

single Shortwave infrared heating lamps
1.Diameter: 10mm
2.Length : 535mm
3.Power : 1100w
4.Voltage: 240v...

Carbon quartz infrared lamp with white reflector
1.Stable working and long lifetime;
2.With a long time testing turn to have a 10,000 hours lifetime

medium wave infrared heater lamps radiation can be absorbed by the surface of the heated material, for plastic, glass and especially is water

Cabon fiber quartz heating lamp
1. Fast response in 10 seconds;
2. Energy-saving compared with Medium wave heating;

1. 850mm overalll length,700mm active length, 3200W/400V
2. Single tube golden infrared heaters comparison
3. Printing Tunnel drying system

Quartz Infrared Lamps
1. Heating Filament: alloy wire
2. Diameter :23*11mm
3. 240VAC 1000Watt
4. Instant On/Off ...

1.alloy wire and tungsten wire as the heating filament
2.quartz glass because it has a hotter melting point than standard glass.
3.Multiple coating

1.alloy wire and tungsten wire as the heating filament
2.quartz glass because it has a hotter melting point than standard glass.
3.Multiple coating

Shortwave 530mm heating furnace infrared lamps
1. Rated voltage: 80-600V
2. Lifetime: 5000 hours
3. Applied Industry: PET blow machine

Clip metal terminal shortwave infrared lamp
1.Voltage:80-600V
2.Power:300-12000W;
3.Applied Industry: Reflow soldering machine

Shortwave 345mm clear tube quartz heater lamp
1.Voltage:80-600V
2.Power:300-12000W;
3.Applied Industry: Auto glass printing drying

Medium wave white infrared quartz heater efficiency
1.Quartz purity: 99.99%
2.Caoting:Golden/Ceramic White
3.Function:Screen printing glass Drying

Medium wave quartz heater for glass tempering
1.Cross section: 33*15mm
2.Coating:Golden/Ceramic White
3.Function: for glass laminating

Double tube IR emitter for metal heating
1.Quartz wall thickness:2mm
2.Peak wavelength: 2.8-4um
3.Function: for powder coating drying