mechanical seals

Type SEW is a single-cartridge seal for use with clean fluids and lubricants.
Equivalent with John Crane Safematic Seal, Sh-Sc-SEW For ABS PUMPS

Single seal/ unbalanced. Independent of direction of rotation/ rubber bellows

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2135/ 2151/2201/3126/45440/4451. 35MM MECHANICAL SEALS FOR GRIPOC PUMPS

Introduction:
Operating limits
Pressure in the sealed chamber: 30kg/cm2
Temperature in the sealed hamber:(4-1)-60℃~180℃ (4-2)-20℃~230℃

burgmann H7N SEALS. BURGMANN H76,BURGMANN H75 SEALS.
For industrial pump, blower pump, diving pump,circulating pump mechanical seal

Features
External configuration
Balanced
Independent of direction of rotation
Independent of pressure direction

The FT05Z is a seal, which can be categorized as a pump seal. It is an alternative to the Flygt 713 90 00, Grindex 50 420 00 (Lower Seal)

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

An economically priced seal with conical spring for a wide range of applications.Recommended for tandem pumps,clean water pumps and pumps for home.

Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2),

High quality and Econalmical seal.Replacement Flowserve RO series seal.
These seals are highly reliable in performance.

Conical spring, 'o'-ring mounted, DIN standard seal and DIN long seat with drive slot, Suitable for a large variety of general and duty applications

1.Temperature:-20-100degree
2.Pressure:0.7Mpa
3.Speeds:13m/sec
4.Used in the water and circulation pumps
Equivalent to Burgmann BT-FN TYPE

equivolent to vulcan type14,142 ,143 seal. rubber bellow seal.for industrial pump, blower pump, diving pump,circulating pump mechanical seal

PTFE Wedge mechanical seals
Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

High quality in and Economical seal . equivalent to CHESTERTON 891 SEALS
Fits extra small seal chambers. Multiple spring seal.

Equivolent to burgmann M3
Professional Performance Tapered Single-Spring Seal
Mechanical seal model M3 can Replace BURGMANN M3N/M37 and MTU EUROPA.

Operating limits
Specification:24~100mm
Pressure:≤2.5MPa
Temperature:-30℃~360℃
Linear speed:≤25m/s

Unbalanced mutiple spring seal with utilizing a simple rugger open rotary unit. FLOWSREVE RO SEALS

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta.

The part of the mechanical seals is seals prat , 304SS,316SS .

1,Single seal
2,Loosely inserted seal face provides self-adjusting capability
3,In-house manufactured sliding parts. equivalent to P02 SEALS.

•The variety of its end face sizes supports wider application.Replace the john crane 9T seals.AES M05, VULAN TYPE 1645 SEALS

technical pump seals
Stationary Ring(Carbon/SiC/TC)
Rotary Ring(SiC/TC/Carbon)
Secondary Seal(VITON/PTFE+VITON)

suppling the seals suit APV pumps . you can choose the material face depend on the working environment. Repalce AES P06 SEALS. It REPLACE P06 SEAL

Applications :
Water, oil, and weakly-corrosive mediums,etc.

Multiple Spring Mechanical Seals.Wedge sealing. Available in PTFE and flexible graphite material craewtes positive seal for use in extreme temperature

Replace John Crane type 502 mechanical seal. With BO seat.
Single seal
Unbalanced
Independent of direction of rotation
Elastomer bellows

It is reliable in performance and widely used in petrochemical pumps.

Replacement AES T01/ 8 / Burgmann M32 seals. Roten L4B, Sterling SM3. Flowserve 38.This mechanical seal, for industrial pump.