metal bellow seals

AZ1B mechanical seal
For blower pump, diving pump and circulating pump
Replacing the mechanical seal of John Crane 1B

Materials:
Stationary Ring(Ceramic/SiC/TC)
Rotary Ring(Carbon/SiC/TC)
Secondary Seal(NBR/EPDM/Viton)
Spring and Punched Parts(Steel)

Applied for submersible pumps, sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

elastomer bellow mecancial seal CR151/152
Equal :flowserve 151/152. vulcan 1511/1522
temperature:-40℃ to +150℃
Pressure:<<1.2mpa
Speed:<<15m/s

Replacement to:
Burgmann MG901/ D1-G55
Aesseal P05U seal
John Crane type 1 seal
Flowserve 51 seal...

this seal is standard for use where expensive and corrosive liquids are being processed.

Features
Stationary bellows
Single Seal
Balanced
Independent of direction of rotation

Stationary ring: Carbon, SIC,TC
Rotary ring: Ceramic, SIC,TC
Secondary seal: NBR, EPDM, Viton
Spring and Metal parts: SS304/SS316/SS316Ti

Applied for submersible pumps and sewage pumps, etc.
Pressure: within 0.35Mpa
Speed: within 6m/s
Temperature: -20 to 100 degree celsius

Elastomer rubber bellows , Equivalent to Burgmann MG1 . MG12. MG13. MG1S20,TS MG1 MECHANICAL SEAL. Burgmann Mechanical Seals for Water Pumps

It is equivalent to JOHN CRANE TYPE1 SEALS.
Pressure: up to 16bar or 230psi
Speed: up to 18m/s or 98 ft/s
Temp: -30deg C to 180deg C...

Stationary ring: Carbon, SIC,TC
Rotary ring: Ceramic, SIC,TC
Secondary seal: NBR, EPDM, Viton
Spring and Metal parts: SS304/SS316/SS316Ti

Applied for submersible pumps and multi-stage deep well pumps
Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -30 to 200 degree celsius

Applications:Clean Water,Sewage Water,Oil and other moderately corrosive fluids.
replace the mechanical seal John Crane 1A

Applicatons:
Water,oil, and weakly-corrosive mediums

Stationary ring: Carbon, SIC,TC
Rotary ring: Ceramic, SIC,TC
Secondary seal: NBR, EPDM, Viton
Spring and Metal parts: SS304/SS316/SS316Ti

Replace to:
Burgmann MG1S20 seal
Aesseal BP02 seal
John Crane type 2 (n seat) seal
Flowserve 150 seal...

type 1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

mechanical shaft seals in pump
If you have any interest in our products, please do not hesitate to contact us,We will supply with our best profes

Materials:
Materials:
Stationary Ring(Ceramic/SiC)
Rotary Ring(Teflon/SiC)
Secondary Seal(Teflon)...

Applied for blower pumps, diving pumps and circulating pumps, etc
Pressure: within 0.8Mpa
Speed: within 5m/s
Temperature: -30 to 200 degree celsius

Secondary Seal:Nitrile(NBR),Ethylene Propylene(EPDM),Fluorocarbon Rubber(Viton)
Pressure:≤2.5MPa

equivolent AES BP02, burgmann MG1S20, TYPE1520 type seal. wide variety of stock Boot Mounted Seats. Burgmann Mechanical Seals for Water Pumps

Materials:
Stationary Ring(Ceramic/SiC)
Rotary Ring(Teflon/SiC)
Secondary Seal(Teflon)
Spring and Metal Part (Steel)

Stationary ring (ceramic/SIC/TC)
Rotary ring (carbon/SIC/TC)
Secondary seal (NBR/EPDM/VITON)
Spring&Metal parts (steel)

Single Spring Mechanical Seals Vulcan type 140/142/143
elastomer bellow design with better compressibility.
has three lengths can be choose.

Rotary Ring: Ceramic/SiC/TC
Stationary Ring: Carbon/SiC/TC
Secondary Seals: NBR/FPM/EPDM
Spring & Punched Parts: SS304/SS316

Applied for blower pumps, diving pumps and circulating pumps, etc
Pressure: within 0.8Mpa
Speed: within 5m/s
Temperature: -30 to 200 degree celsius

Secondary Seal:Nitrile(NBR),Ethylene Propylene(EPDM)
Seat Type:
Standard:TBCT24
Alternative:TBCT20,TBCG60

elastomer bellow mechanical seal vulcan type 14/142/143
temperature:-40℃ to +150℃
Pressure:<<1.0Mpa
Speed:<<15m/s