one way valve

1. Two-position Two-Way solenoid valve
2. medium: air,water,oil,gas.
3. Good quality and cheap price

1)back corner sealed coffee bag
2)material:matt OPP/AL/PE
3)with side gusset and one way degassing valve
4)with excellent printing

Specifications: DN15, DN20 and DN25 or 1/2-inch, 3/4-inch and 1-inch

HYDAC standard 4-way ball valve
1.DN08
2.Male thread DIN2353 light series
3.M16X1.5

1/4'' female/female three way valve;nickel plated,1.6MPa

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

Port Size: 1/4"
3/2 way,single solenoid valve
Housing: Aluminum anodized Pilot flange: plastic (POM)
Wroking Pressure :1-10bar

Working Medium :Air,Water,Steam
Motion Pattern :Guide Type

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves

usually an actuator, allowing a relatively small signal to control a large device.

3way miniature water brass solenoid valve G1/8''
Medium: liquid, gas, oil (below 20cst)
Sealing material: NBR
Body material: brass
temp.: -5~80

2 way Solenoid Valve water
1.Normally Closed, Brass body
2.low power consumption,1 million times life testing
3. Direct Drive Type,High Quality

2-way pilot valve used for operating dust collector valves.
1. Order Code: APG
2. Valve body is brass
3. Thread: G, NPT

PN: 315bar
DN: 6~40mm
Connection:manifold mounted, flanged, female thread,male thread
Carbon steel material
Applicable to hydraulic oil

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

Orifice: 35mm
Standard voltage : 24VDC,110VAC, 220VAC
Other special AC/DC can be made to client's order

2 way High pressure solenoid valve 240V flange connection
Medium: high pressure liquid, gas
Sealing material: PTFE
Mode of action: pilot operated

* Flow control Valve
* RE Series Flow Control Valve;
* Pneumatic component
*Port Size:G1/8,G1/4,G3/8,G1/2

1/2 inch 3 way high pressure hydraulic ball valve
3 way L port
NPT female thread
wog 5800 PSI

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

THFX series reversing valve (two way valve) is a device used in pneumatic transmission system to change conveying directions in flour milling plant.

1.Pilot diaphragm drive, normally open.
2.Orifice: 16mm
3.Can be operated directly without pressure.

Pneumatic quick air vent valve 1/8 1/4 aluminum alloy exhaust control valve 3/8 1/2
Aluminum Alloy;
female ;
high quality .

Type:Normally close
Sealing materials: NITON
Orifice:2mm
Voltage:AC110V AC220V 24V DC 12V DC
Operating Temperature: -10~150°C...

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

2 inch plastic irrigation water solenoid valve
Medium: Water, Air,Gas
Temperature: -5~60ºC
Pressure: N/C, 0.3~6bar
Coil power: AC 22VA; DC 14W

solenoid valve is the interface between electronic controllers and pneumatic systems.