ptfe mechanical seals

Mostly Use: High corrosion mediums of different concentrations,
such as sulfuric acid, hydrochloric acid,

•The multi-spring ensures end face compensation.
•The variety of its end face sizes supports wider application.
Replace the john crane 9T seals

PTFE Wedge mechanical seals
Applications: Petroleum, chemical solvents, weak and medium acids, etc.

PTFE Wedge mechanical seals
Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

multiple spring mechanical seal.Replace John crane 59U. type 58U SEALS. PTFE wedge mechanical seals.

Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

•The variety of its end face sizes supports wider application.Replace the john crane 9T seals.AES M05, VULAN TYPE 1645 SEALS

PTFE Wedge mechanical seals
Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

Suit Hilge series pumps ,include Hygiana, Euro Hygia,Maxana,Dura,Sipla,Contra,and Durietta.

Combined Materials:
Stationary Ring: Ceramic/SiC/TC
Rotary Ring: Carbon/SiC/TC
Secondary Seal: Teflon
Spring and Metal Part: Steel

Mechanical Seal H74 Replace Burgmann H74 for Industrial Pump and Water Pump . multiple spring equivalent to BURGMANN H74 seals.

PTFE Wedge mechanical seals
Medium: HCL,chlorine and other strong corrosive media without bearing any suspended particles.

Corrosion resistant Chemical Pumps
SD/SL Pumps mechanical seal
WB3-25mm PTFE Teflon bellows mechanical seals For Corrosion resistant Chemical pumps

Flygt and Grindex Pump Seals /Flygt and Grindex Pump Seals 2084/2153/2151-011/2151-050 35MM MECHANICAL SEALS FOR GRIPOC PUMPS

Replacement the burgmann M2N seals. CARBON Rotory face. G9 stationary seat.

this kind of mechanical seals parts is very popular in this mechanical seals line .

Upper and lower 25 mm shaft size seals for use together, but available separately, to suit various A.B.S.® submersible pumps

1.Application for kinds of chemical fluids
2.Long service life
3.Quick delivery and best service

Materials:
Stationary Ring: Carbon/SiC/TC
Rotary Ring: Carbon/SiC/TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Part: Steel

ITALY Lowara PUMP SV Series 2,4,8,16 Mechanical Seals.Mechanical seal kits for Xylem Lowara pump KL01ABD KL01ABE KL01ABF.ITT Lowara SV Pump seals.

this seals suit for ALFA LAVAL PUMPS.REPLACE VULCAN TYPE93-22MM. the seals Suit pump medel ME155AE. GM1,GM2 and MG2A. SHAFT SIZE : 22MM

Single elastomer bellows rotating seal. Unbalanced. High flexibility due to extended selection of materials. Replace Burgmann MG9 type seal.

Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec

replace AES P09 SEALS
1)we are machanical seal manufacture.
2)good price and high qulity
3)promot delievery and long time life
4)past test

Applications: Sulfuric acid,hydrochloric acid,phosphoric acid,acetic acid,and nitric acid with avrious degrees,etc.

This seal equivalent to burgmann type M7N series mechanical seal. M7N for Burgmann Water Pump Spare Parts Pump Seal Mechanical Seal

Wave spring seal.Equivolent to AES W03 type seal. Used for SR pump series pumps from S.S.P. Monolothic head material .

Mechanical seals for Donjoy Lobe Pump . and Centrifugal Pumps , S-KS/KS/BS/etx
and Self-priming Pump , CIP ,CIP+, and Blener/Mix pumps

successfully used in many different applications at Clean water,sewage water and other moderately corrosive fluids.REPLACE AES CONVERTOR II CARTRIDE

Operating Conditions:
Temperature:≤120oC
Pressure: ≤0.5Mpa
Speed: ≤ 10 m/Sec