single mechanical seal

Johncrane680 metal bellow mechanical seal
for general-purpose applications
a standard for low-temperature applications

cup mounted seats according with DIN24960 Standard

Balanced Dual mechanical seal. It replacment burgmann AX25D BOULE MECHANICA SEALS. WORKING WELL FOR PUMPS

Single Spring Mechanical Seals
Size:35-85mm
rotary ring:car/sic/tc
stationary ring:car/sic/tc
secondary seal :nbr/erp/vit...

1. Single Mechanical shaft seal
2. Flushed shaft seal with oil seal

Operational Conditions:
Temperature:-30℃ to +210℃
Pressure: ≤1.2MPa
Speed: ≤18m/s

Productivity:100000Sets/Month;Min. Order:10 set;Packing:individual packs;Transportation:by air or boat;DeliveryDate:15days;PaymentType:TT or others;T

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

No plastic parts
Unitised rotary, no loose faces to fall out during installation

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

Pressure: within 0.8Mpa
Speed: within 10m/s
Temperature: -20 to 150 degree celsius
Medium: water, oil and weakly-corrosive mediums, etc.

This Seal Kits to ALFA LAVAL PUMPS LKHI,LKHP,LKHSP and LKH 100 Series pumps.it replacment type 192, AES TY[E MP07U Mechanical seals

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

1.unbalanced
2.single seal
3.dependent on direction of rotation.

Type 4610 cartridge seal,compact, single-cartridge seal,meets key industry pump standards, and is designed to permit use in rotating shaft equipment

Robust & compact rotary design
Stainless steel metal parts
No plastic parts

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

Transportation:by air or boat;DeliveryDate: 15-20days;PaymentType:TT or others;Trademark:TLS;ExpRegion:Europe USA and East Asia;

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

STATIONARY RING: CERAMIC/SIC/TC
ROTARY RING: CARBON/SIC/TC
SECONDARY SEAL: NBR/EPDM/VITON
SPRING&METAL PARTS: STEEL

Single Spring Mechanical Seals CR208
Size:30 and 35mm

Grunfos SARLIN seals kit. used water pumps Mechanical seals. used in conjunction with AESSEAL SSAIS06 mechanical seals.

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s

size: 31.7mm. replace AES P07 seals.

Productivity:10000;Transportation:by air or boat;PaymentType:TT or others;Trademark:TLS;ExpRegion:Europe USA and East Asia;

For auto cooling pump mechanical seal
●Axial pipe(SUS304/SUS316)
●Stationary seat(SUS304/SUS316)
●Bellows(NBR/EPDM/VITON)

TBMTN mechanical seal
For industrial pumps
Replacing the mechanical seal of Burgmann M7N
Pressure: ≤1.2MPa
Speed: ≤15m/s

Combined Materials:
Stationary Ring (Ceramic/SiC/TC)
Rotary Ring (Carbon/SiC/TC)
Secondary Seal (NBR/EPDM/Viton)
Spring and Metal Part (Steel)

FTHRN has the same design and size as the original Bergmann HRN which can be a good substitute for the original product. suitable godwin pump

Operational Conditions:
Temperature:-40℃ to +200℃
Pressure: ≤0.8MPa
Speed: ≤18m/s