stator coils

This stator machine is equipped with X and Y spindle auto feeding device. It can automatically insert coil and wedge into stator slot simultaneously

1.The lacing type, like slot by slot lacing, intercal lacing, and fancy lacing can be set for different stator slot configurations
2.It's easy to use

1.The winding machine can wind two stators at same time
2.Has two working station with two flyers
3.Spindle speed:0-450 rpm
4.Adopt touch screen

1.multiple wire parallel coil winding
2.Effective length of tooling: ≤400mm
3.Swing diameter: ≤550mm

After coil insertion process, the upper and bottom side of coil will not be the same shape. Therefore, coil forming will be needed before next process

1.Driven by hydraulic system
2.PLC programming
3.Working before winding lacing
4.Design of inner expansion
5.The stator O.D. maximum is 160mm.

1.different parameter could be set in human-machine interface.
2.used for inserting coil and wedge into the stator slot simultaneously.

The motor stator coil injector machine is suitable for medium motor stator , such as water pump motor, air conditioner motor , washing machine motor.

1.Fast speed,low noise,simple operation
2.Equipps with pressing, automatic feeding,automatic cutting device
3.Lacing up and down sids Simultaneously

The semi automatic motor stator coil inserting machine is suitable for universal motor and DC motor.
It is suitable for universal motor and DC motor.

Auto wedge feeding, auto cutting and forming,
insert into stator slot together with coil,
wide application range,
high automation
easy to operat

The coil lacing machine is adopt Horizontal structure
single side lacing method
suitable for medium and big motor stator with high winding over-hang

1.Apots 4 winding working stations
2. has self-diagnosis function
3.used for BLDC stator coil winding
4.parameter can be set on HMI

1.Designed for single phase motors
2.Support remote control in ipad.
3.With 2 stator winding working stations and 1 coil inserting working station.

This motor stator coil winding machine is suitable for compressor motor ,generator stator and other electric motor with high filling slot stator.

1.Suitable for multi-pole brushless motor stator coil winding
2.Can wind multiple shares coil at the same time
3.Winding speed can up to 800-1200RPM

For this winding inserting machine, the wedge feeding is to be done by stepping motor, while coil and wedge inserting is done by servo system.

1.2 winding heads with 4 working stations.
2.Suitable for high production capacity stator coil winding.
3.Stator OD:0-200mm.
4.Stack height:0-160mm

This stator coil winding machine adopts special purpose controller which could set the function of arraying direction, winding start point and so on

1.Has two working stations to winding coil
2.Has one set winding tooling and three vertical winding forms.
3.has no distinct vibration and noise.

1.Driven by the hydraulic system,controlled by the PLC.
2. Its forming is perfectly done by inner expansion,outer wrapping and overhanging pressing.

The stator coil lacing machine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and others.

The automatic ceiling fan winding machine is used for household ceiling fans, commercial ceiling fans and industrial ceiling fan.
Adopts 2 stations

1.Suitable for two poles stator coil winding,such as universal motor,series motor
2.Has two coil winding working stations
3.max winding speed 450rpm

It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.

1.The stator coil foring machine is horizontal type with a auto slider.
2.The parameter can be set in the HMI
3.Max staor OD:300mm
4.Power: 380V

1. Easy operation and simple tooling change.
2. PLC programming.
3. Driven by hydraulic system.
4. Machine productivity: around 1500pcs/8hours.

1.Adopts PLC system,horizontal structure and auto feeding device design
2.Adopts schematic of inner expansion, outside wrapping and over-hang forming

1.The machine is suitable for 2 poles. 4 poles, 6 poles coils winding.
2.Especially suitable for high production capacity requirement.

1. The coil insertion machine could insert coil and wedge into stator by servo system at a time.
2 It can insert coils and wedge into stator slot.