two way solenoid valves

Orifice: 35mm
Standard voltage : 24VDC,110VAC, 220VAC
Other special AC/DC can be made to client's order

Normally Close Solenoid Valve

Productivity:100,000.00;Min. Order:1 pc;Packing:white carton;Transportation:By sea,air or express;DeliveryDate:immediately;PaymentType:By L/C, D/P, T

Product description
(1)Position:two-positon five-way
(2)O-ring:material high-end NBR
(3)Life:30,000,000 times life

A pneumatic solenoid valve is a switch for routing air to any pneumatic device,

 
Mini Brass Direct Drive 2 Way

1.Operating Temperature Rang: -5~+100℃
2.Material of Body: Brass
3.Material of Oil Seal: PTFE
4.Operation Fluid Viscosity: 50 CST(Below)

1.Pilot diaphragm drive, normally open.
2.Orifice: 16mm
3.Can be operated directly without pressure.

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

specialized in production of pneumatic tools and pneumatic machine elements: solenoid valve, cylinder, air source treatment unit, pneumatic accessory.

Plastic 2 Way Solenoid Valve
1.Normally Closed
2.Good quality and fair price
3.Dust elimination and filter should go ahead of the use of medium

Direct Drive Valve
Alloy Body Valve
F Class Insulation
3 Way Valves

quality of ISO9001 procedures to meet world standard and internationalized specification.

It's applicable to weak acid and weak base places . Ideal for purified water equipment, food machinery and medical machinery.

Productivity:100,000,000.00;Min. Order:1 pc;Packing:white carton;Transportation:By Sea, air, express;DeliveryDate:immediately;PaymentType:L/C, T/T, o

Power consumption AC: 3.5VA DC : 3.0W
Protection IP65 ( DIN40050 )
Connector DIN43650C

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

High pressure SS304 steam solenoid valve
Medium: liquid, gas, oil
Temperature:-5~180
Mode of action: pilot operating
Working type: Normally closed

Product description
1.Large flow(1300L/min,Cv=1.32)
2.low requirement quality of air filteration
3.Reliable quality sealing with longer durabilt

It's applicable to weak acid and weak base places . Ideal for purified water equipment, food machinery and medical machinery.

Type:Normally close
Sealing materials: NITON
Orifice:2mm
Voltage:AC110V AC220V 24V DC 12V DC
Operating Temperature: -10~150°C...

2V series Two-position Two-way Solenoid Valve

usually an actuator, allowing a relatively small signal to control a large device.

3way miniature water brass solenoid valve G1/8''
Medium: liquid, gas, oil (below 20cst)
Sealing material: NBR
Body material: brass
temp.: -5~80

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

2 way Solenoid Valve water
1.Normally Closed, Brass body
2.low power consumption,1 million times life testing
3. Direct Drive Type,High Quality

Pilot diaphragm Direct acting
Standard voltage: 220VAC, 110VAC, 24VDC
DIN43650A connector

1. Mass production of 4V series;
2. All of the components ans parts made by ourselves;
3. Lowest price;
4. Perfect cost performance.

1. Air Control Two-Way valve
2. medium: air,water,oil,gas.
3. ISO9001:2008
4. Good quality and low price

air pneumatic water gas oil plastic or aluminum or brass
1.ISO9001:2008
2.Supply:25000pcs/month
3.Good Quality:100% tested
4.Body:Plastic