Product Name: Elevator Door Detector
Response time :relay output 61ms
Transistor output 37ms
Number of infra red diodes:32diode sets
Scanning beams:128-94beams
detecting height:20-1840mm
| Items | Technical Parameters |
| Beams Number | 128beams (infrared) |
| Sensors Number | 32 pairs (refer to pictures) |
| Sensors Interval | 58.8 mm (refer to pictures) |
| Beams Center Points Interval | 10.5mm/11.5mm (refer to pictures) |
| Scanning Form | Line by line |
| Response Time | 61msec(relating to detecting points of scanning cycle) |
| Detecting Height | 20-1840mm |
| Detecting Range | 0~3m moving door |
| Light Immunity | 100,000lux(visible light) |
| Allowable Deviation Angle | ≤10° |
| Allowable Deviation Position | Vertical: ±10mm/7° |
| Horizontal: ±5mm/5° | |
| Protecting States | Cable fault |
| Power fault | |
| Current Consumption | Less than100mA |
| Protection Grade | IP54 standard |
| Ambient Temp. | -20°C~ +65°C |
| Storage Temperature | -40°C~ +80°C |
| Other functions | One transmitter is shielded after 120s' blocking |
| Indicator | Power (green LED) |
| System fault/beams blocked(orange LED) | |
| Shell Material | Aluminum alloy surface |
| spray plastic(black) | |
| Shell Cover (light filter) | Embedded installation of infrared penetrating |
| for blocking off non-infrared | |
| Authentication | TUV CE(EMC) |
| Working Voltage | 200~240VAC or 12-30VDC |
| Power supply | 220VAC or 24VDC |
Items 917N7 Response time replay output 61ms transistor output 37ms Number of infra diodes 32 Diode sets Scanning beams 128-94beams Detecting height 20-1840 mm Infra red diodes range 58.8mm Redundancy One transmitter shielded after 120s detected absent Power consumption ≤4 w or 100mA/DC24 v Operating temperature '-20℃- +65 ℃ Tolerance vertical> 10mm/10° Horizontal>5mm/7° Light immunity ≤100000Lux EMC(En12015)(En15016) EFT Passed level 2 tests D (±1kv ) Surge D(±2.5kv line to ground ,±1kv line to line ) ESD A(Air discharge±15kv Direct discharge ±6kv) Radio-frequency D(10V rms,150kHz-80MHz,80%,1kHz Amp.Mod.,1%,3s ) Radiated-immuity D(30 V/m,80MHz-1.96GHz,80%) Vibration Vibration 20 to 500Hz 4hrs per X-Y-Z axis,sinusoidal vibration 30 mins per X-Y-Z axis Detecting range 0-3m Protection level IP54(TX,RX),IP31(Power box) Voice reminder Buzzer in RX,after continuous detection for 15s,buzzer ON.
