energy saving injection moulding machine
1.Clamping Unit
5-point double toggle clamping system
Mechanical &electrical safety devices
Low pressure mould protection
Controllable multi-stage mold open/close position ,pressure & speed
Fast mould clamping with differential device
Robust casting construction with strengthened tie bar for maximum service life and best molding results
Automatic mould height adjustment
Variable modes of ejector movement
Automatic central lubrication
2.
Injection Unit
Double drive cylinder injection system with symmetrical oil circuit
Controllable multi-stage injection pressure,speed and position
Controllable multi-stage dwell pressure,speed and time
Controllable multi-stage charging speed , position and time
PID barrel temperature control
Screw plasticizing back pressure control
Suck back function
Plasticizing cold start prevention
Screw speed inspection
Self purging function
Effucient plasticizing device with strong torque hydraulic motor
3.
Control System
Japaness controller with 10 inch LED color screen
Mold data storage
Linear transducer for clamping/injection/ejection control
English,Spanish,Portuguese,Russian,Arabic and other language options
4.
Hydraulic System
Effucient and sound reduced hydraulic system
Weldless oil circuit
Hydraulic proportional control
Hydraulic elements by well-known brand with high
Oil temperature alarm
Lunar series specification:
| INJECTION UNIT | YH 170 | |||
| Screw specification | T | A | B | C |
| Screw diameter (mm) | 36 | 40 | 45 | 48 |
| Screw stroke (mm) | 225 | 225 | 225 | 225 |
| Screw L:D(L/D) | 24 | 22.5 | 20 | 18.5 |
| Shot volume (cm³) | 229 | 283 | 358 | 407 |
| Shot weight PS(g) | 206 | 254 | 322 | 366 |
| Injection pressure(Mpa) | 267 | 216 | 171 | 150 |
| Dwell pressure(kgf/cm²) | 2720 | 2203 | 1741 | 1530 |
| Injection speed(mm/sec) | 110 | 110 | 110 | 110 |
| Injection rate(cm³/sec) | 111.9 | 138.2 | 174.9 | 199.0 |
| Screw rotate speed (rpm) | 230 | 230 | 230 | 230 |
| Nozzle sealing force(KN) | 46.6 | |||
| Nozzle advance stroke(mm) | 30 | |||
| Heater power (KW) | 10.24 | |||
| CLAMPING UNIT | ||||
| Clamp force (KN) | 1700 | |||
| Toggle stroke(mm) | 435 | |||
| Space between tie bars(mm) | 470x470 | |||
| Max.mould height(mm) | 500 | |||
| Min.mould height(mm) | 180 | |||
| Ejector number(pc) | 5 | |||
| Ejector force (KN) | 50.9 | |||
| Ejector stroke(mm) | 130 | |||
| OTHERS | ||||
| Special pump pressure(Mpa) | 21 | |||
| Standard pump pressure(Mpa) | 18 | |||
| Machine dimensions(LxWxH) m | 5.0x1.11x1.78 | |||
| Machine weight(T) | 5 | |||
| Oil tank capacity(L) | 250 | |||
| Pump motor power(KW) | 15 | |||
dimension:
| A | B | C | D | E | F | G | a | b | c | d | e | f | g | |
| YH170 | 435 | 180 | 30 | 300 | 125 | 3 | 10 | 4460 | 5030 | 2000 | 1170 | 820 | 1800 | 30 |
Emergence of mode locking pressure is not normal? Molding process injection molding machine simply lock is divided into low - low speed, acceleration, mold locking low - to about 3MM high pressure mode locking, no high pressure mode locking, locking mold is not tight, will appear Yi plastic injection adverse. If the high pressure mode locking for quite a long time (generally 0.2S or so), you need to consider the locking range is appropriate? Some such as injection molding
Machine is not need to consider these.
Injection molding machine, injection molding machine or injection machine. It is the main forming equipment plastic products, thermoplastic or thermosetting plastics using plastic molding into various shapes. Divided into vertical, horizontal, all electric. The function of heating plastic injection, high voltage is applied to the molten plastic, so that the injection and full of mold cavity
.jpg)
.jpg)
