preform injection moulding machine
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;
| FL620 | ||||
| INJECTION UNIT | ||||
| A | B | C | ||
| Screw dimeeter | mm | 85 | 90 | 95 |
| Screw L:D | L/D | 23.3 | 22 | 20.8 |
| Shot volume | cm3 | 2393 | 2683 | 2989 |
| njection pressure | Mpa | 178.3 | 159 | 142.7 |
| Screw rotate speed | rpm | 126 | ||
| Shot weight PS | g | 2177 | 2441 | 2719 |
| Shot weight PS | oz | 76.827 | 86.139 | 95.945 |
| CLAMPING UNIT | ||||
| Clamp force | KN | 6200 | ||
| Toggle stroke | mm | 850 | ||
| Space betweentie bars | mm | 845×830 | ||
| Max.mould height | mm | 850 | ||
| Min. mould height | mm | 300 | ||
| Ejector stroke | mm | 225 | ||
| Ejector force | KN | 152 | ||
| Ejector number | pc | 12+1 | ||
| OTHERS | ||||
| Die positioning hole | mm | 200 | ||
| Pump pressure | Mpa | 16 | ||
| Pump motor pOwer | KW | 55 | ||
| Heating power | KW | 42 | ||
| Oil tank capacity | L | 1010 | ||
| Machine weight | T | 25 | ||
| Machine demensions(L×W×H) | m | 8.85×2.3×2.9 | ||
