UK / British WALL USB power Socket, 4 outlets
Model no.: U7000
Individual switch;
Individual switch;
1.T shape, 4-outlet wall socket
2.Electrical Rating:13Amp,220-250Volts
3. with individual switches
4.375J surge protection
6.Rugged high-impact plastic housing
7.BS approved
8. 2usb ports, output: 500/1000max2
Product Specifications:
1:Input:Car charge:DC12V-24V
Travel charger:100V-240V~,50/60HZ
2:Output:1 USB DC 5V/1000mA
3:Ripple Boltage:<100mA
4:End chargeing current:100mA
5:Over-Current protection.
Must
- USB 2.0, A-type socket AC/DC charger for use in domestic and industrial environments.
- Should operate with a standard, 3-pin UK socket
- Comply with the following regulatory requirements
- Be fully tested, approved, certified and marked appropriately for CE marking.
- RoHS compliant and marked appropriately.
- Fulfil the requirements of Low Voltage Directives 2006/95 EG (EN 60950-1 11/2006)
- Fulfil the regulations of the EMC Directives 2004/108 EC (EN 55022 05/2008 & EN 55024 10/2003)
- Any other applicable regulatory standards.
- Be marked and suitable for WEEE regulatory requirements.
- All EMC and safety test reports to be supplied with samples.
- Pass independent laboratory test conducted by notified body.
- Meet the following electrical requirements
- Output voltage: 5.0V ±0.25V (at 250mA to 350mA max)
- Output current: 1000 mA
- Universal voltage inputs (90V – 250V)
- Input frequency: 47-63 Hz
- Faultlessly function within an ambient temperature range from -10°C to +55°C, between 5% to 95% non-condensing relative humidity.
- Be suitable for storage and transportation in conditions between –40°C to +75°C and 5% to 95% non-condensing relative humidity.
- Weigh no more than 80g
- The elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second.
- The power supply shall withstand a continuous output without damage.
- Be delivered with appropriate declaration/certificate of conformity.
- Be individually boxed
- Be deliverable through a standard UK letter plate and fit in packaging size L 160mm x H 34mm x D 45mm
Should
- Have instructions
- Not have a cable
Could
- Be multi country socket compatible
- Have an appropriate surface for branding in the future.
Won't
- Have any branding
Output voltage: 5.0V ±0.25V (at 500 mA) - this may be cheaper and more common to find but will not power/charge our display.
WARNING
1.For indoor use only
2.Avoid using this device in wet or high temperature environment.
3.Keep this device away from children and infants.
