America 24hours Mechanical Dial Timer with one 2-prong outlet
1.Off and On switch
2.Single controlled output, 2-pin without earthing
3.24 Hours or AM/PM display
4.Min.Setting time:30 minutes,48 programmings
5. Cycle time: 24 hours
6. ETL listed
7. PC housing
8.125V,15A,60HZ, 1875W
9. Clamshell packing
Instructions:
Locate an electrical outlet that is close to the
device you want to control.
Set the current time - turning clockwise
align bold arrow on the front of the timer to
present time (lines under numbers are in
increments of 30minutes).
NOTE: Dial is based on AM/PM.
Determine desired start time and push down all pins until desired OFF time
NOTE:
The pins are black slices around the dial.
Plug your electrical device directly into the timer. Electrical device must be set to ON
position for the timer control to work properly.
Instructions:
Locate an electrical outlet that is close to the
device you want to control.
Set the current time - turning clockwise
align bold arrow on the front of the timer to
present time (lines under numbers are in
increments of 30minutes).
NOTE: Dial is based on AM/PM.
Determine desired start time and push down all pins until desired OFF time
NOTE:
The pins are black slices around the dial.
Plug your electrical device directly into the timer. Electrical device must be set to ON
position for the timer control to work properly.
