Features:
AC input range selectable by switch
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
Cooling Fan ON-OFF auto control
100% full load burn-in test
Fixed switching frequency at 90 KHz
1 year warranty
MODEL | S-320-24 | |
OUTPUT | DC VOLTAGE | 24V |
RATED CURRENT | 12.5A | |
CURRENT RANGE | 0 ~ 12.5A | |
RATED POWER | 300W | |
RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
VOLTAGE ADJ. RANGE | 20 ~ 26.4V | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±0.5% | |
SETUP, RISE, HOLD TIME | 2000ms, 20ms, 24ms at full load | |
INPUT | VOLTAGE RANGE | 88 ~ 132VAC / 176 ~ 264VAC by switch 248 ~ 370VDC |
FREQUENCY RANGE | 47 ~ 63Hz | |
EFFICIENCY (Typ.) | 86% | |
AC CURRENT | 6A/115VAC 3.5A/230VAC | |
INRUSH CURRENT (max.) | 18A/115VAC 36A/230VAC | |
LEAKAGE CURRENT | <3.5mA / 240VAC | |
PROTECTION | OVERLOAD | 105 ~ 135% rated output power |
Protection type: Hiccup mode, recovers automatically after fault conditionis removed. | ||
OVER VOLTAGE | 27.6 ~ 32.4V | |
Protection type: Hiccup mode, recovers automatically after fault conditionis removed. | ||
FAN CONTROL O.T.P. | RTH1 ≥70ºC FAN ON, ≤65ºC FAN OFF, ≥80ºC | |
Protection type: Hiccup mode, recovers automatically after fault conditionis removed. | ||
ENVIRONMENT | WORKING TEMP. | -10 ~ +60ºC |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |
TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY & EMC | SAFETY STANDARDS | Design refer to UL1950-1 |
WITHSTAND VOLTAGE | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
OTHERS | MTBF | 188.7K hrs min. MIL-HDBK-217F (25ºC) |
DIMENSION | 215*115*50mm (L*W*H) | |
PACKING | 0.94Kg; 12pcs/13.8Kg/0.0263CMB | |
NOTE | 1. All parameters NOT specially mentioned are measured at230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple &noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wireterminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includesset up tolerance, line regulation and load regulation. |
AC DC Power Converter S-320-24 Mechanical Specification:
AC DC Power Converter S-320-24 Certificate for LVD:
S-320-24 Certificate for EMC: