model no.:N35
size:D22x1
application:industrial/packing/daily use
shape:block
type:permanent
composite:Nd/Fe/B
brand name:Honfon
3M
Adhesive Transfer Tapes
with Adhesive 200
467 • 468 • 9567 • 9568
Product Description :
3M™ Adhesive Transfer Tapes with 3M™ Adhesive 200 are the industry choice for metal nameplates for the industrial or electronic applications because of excellent quality, consistency and durability. In addition, as a result of 3M's innovative, proprietary process, Adhesive 200 also offers the following performance characteristics:
• Excellent high temperature performance as well as excellent shear strength (that minimizes edge lifting and slippage of parts).
• Excellent resistance to harsh environments; this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water. In addition, it performs well after exposures to humidity and hot/cold cycles.
• Outstanding peel adhesion values are outstanding on metals and HSE plastics.
Peel adhesion increases with increased adhesive thickness.
Construction:
Note 1: The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc. While past data pages have listed nominal thicknesses of 2 and 5 mils, the coat weight (and theoretical caliper) has not changed.
Note 2: Typical liner release value, in grams/inch, tested at 90 ipm.
Typical Physical Properties and Performance Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
I. Adhesion to stainless steel
ASTM D3330 modified (90 degree peel, 2 mil aluminum foil backing)
II. Adhesion to Other Surfaces
ASTM D3330 modified (90 degree peel, 2 mil aluminum foil backing)
V. Environmental Performance
The properties defined are based on the attachment of impervious faceplate materials (such as aluminum) to an aluminum test surface.
.Bond Build-up: The bond strength of 3M™ Adhesive 200 increases as a function of time and temperature.
.Humidity Resistance: High humidity has a minimal effect on adhesive performance. Bond strengths are generally higher after exposure for 7 days at 90°F (32°C) and 90% relative humidity.
.UV Resistance: When properly applied, nameplates and decorative trim parts are not adversely affected by outdoor exposure.
.Water Resistance: Immersion in water has no appreciable effect on the bond strength. After 100 hours in room temperature water the bond actually shows an increase in strength.
.Temperature Cycling Resistance: Bond strength generally increases after cycling four times through:
4 hours at 158°F (70°C)
4 hours at -20°F (-29°C)
16 hours at room temperature
.Chemical Resistance: When properly applied, nameplate and decorative trim parts will hold securely after exposure to numerous chemicals including gasoline, MEK, oil, Freon™ TF, sodium chloride solution, mild acids and alkalis.
VI. Low Service Temperature
-40°F (-40°C)
Many applications survive below this temperature (factors affecting successful applications are: materials being bonded, dwell at RT before cold exposure and stress below the T [i.e., expansion/contraction stresses, impact]). Optimum conditions are: bonding HSE materials, longer time at RT before cold exposure and little or no stress below the Tg.
Note: Adhesive 200 is not recommended for low energy plastics (polypropylene, polyethylene, powder coated paints). For these surfaces please refer to 3M™ Adhesives 300, 350, 300LSE and the 300MP. The Adhesive 300LSE has been used more frequently as the bond areas in applications become smaller and smaller. It offers the smooth, high performance characteristics of the 3M™ Adhesive 200MP with higher adhesion to plastic. Adhesive 300LSE is ideal for bonding to polyethylene, polypropylene, powder coated paints and for applications where the bonded area is less than 1/4" wide.
3MTM
Adhesive Transfer Tapes
with Adhesive 200
467 • 468 • 9567 • 9568
Application Ideas:
• Metal nameplates for the appliance or electronic markets.
• Excellent general purpose bonding in the industrial market.
• Used for nameplates and decorative plates produced on roll to roll rotary die cutting process. 3M™ Adhesive Transfer Tapes 9567 and 9568 are stabilized adhesive for narrow rolls.
For Additional Information:
To request additional product information or to arrange for sales assistance, call toll free 1-800-223-7427
or visit website. Address correspondence to: 3M Engineered Adhesives Division, 3M
Center, Building 220-7E-01, St. Paul, MN 55144-1000.
Certification/Recognition:
TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
MSDS: These products are not subject to the MSDS requirements of the Occupational Safety and Health Administration's Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for use, the products should not present a health and safety hazard. However, use or processing of the products in a manner not in accordance with the directions for use may affect their performance and present potential health and safety hazards.UL: Many of these products have been recognized by Underwriters Laboratories Inc. under Standard, UL 969, Marking and Labeling Systems Materials Component.
Important Notice:
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.
Limitation of Remedies and Liability:
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT.
3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability.
Self adhesive magnets with disc
