\Introduction
1.jmctrl at msn dot cnJMDM-4D dynamic cinema control software has two parts: edit-end (JMDM-4Dfilm editor) and client-end (JMDM-4Dfilm player). Coordinate of JMDM series of many types industrial 4D seat special effect equipment to use, consist of JMDM 4D cinemas seat special equipment control system.One set of system configuration: one editor and one player software opening jurisdiction. Usually match one Dog used to open the editor and the player software. Can also according to the customer requirements add one ,that is one Dog used to open editor software and the other one is to open player software.
Function as follows:
1\Used for 4D cinema manufacturers, used in edit the dynamic seat and special effect equipment of the 4D three-dimensional film synchronize act with the cinema plot, also can play edited special effect movie, to test the effect.
2\Editing special effect in the software interface when see the movie; or edit motion through generated motion file.
3\Realized functions: making the seat special effect \ film three-dimensional pictures of the three-dimensional 4D dynamic film closely combined with the film plot, can easy to edit seat and special effect motion: shock\ jolt\ drop\ storm\ thunder\ rain\ hit\ spraying water mist\pat leg\ jet\ smoke\ snow\ smell\ spray wind, bring the audience dreamlike and exciting amusement.
\Instructions
1\Install Dog drive
Please run the drive install program (DogInst.exe) which supplied by our company at the first use, click install after the program running.
2. According to MSCOMM32
If the players double clicked with no response after the drive installed, please install MSCOMM32 again; if it is present a inefficient port number, just change the com5 of the file config.ini into the port using in the computer. (Examine methods of the 'com'port : the right button of' my computer'→ equipment manager→ port) .
It must insert the Dog No matter running the JMDM-4D special effect edit-end or the client-end software, otherwise the program can not running; and cannot pull out the Dog when the program running.
4\Edit software and player software operation explanations
Divided into two categories according to the cylinder: cylinder with electronic scale\cylinder without electronic scale. Choose the controller according to the difference of the hardware and software.
5\Insert the Dog
It must insert the Dog when running the JMDM-4D special effect edit-end play software, otherwise the program can not running; and cannot pull out the Dog when the program running.
\4D film edit-end operation explanations
3-1 corresponding controller circuit for each check box( tick represent open the circuit\on the contrary, represent close the circuit)
Cylinder 1 up---→path one cylinder 2 down---→path four
Cylinder 1 down--→path two cylinder 3 up----→path five
Cylinder 2 up-----→path three cylinder 3 down--→path six
The other circuits are corresponding with the interface
(Customers can provide themselves' wiring situation to us; we can modify into correspondence name, for example, special effect path 11 changes into spray and so on)
(If that is two paths control one cylinder; cylinder turn to up/down, tick the box before the cylinder up/down, stopping the cylinder need to removed all of the cylinder up/down ticks)
If that is one path control one cylinder, connect the wiring in ordered , for example, cylinder one up connect cylinder one down and cylinder one down connect cylinder two up.etc.
3-2 The function for each button as follows
1.open file button: choose the movie file which needs to edit motion in the popup dialogue box.
2. play / pause: Can play or pause film playing, add motion only in the pause state.
3.back/ next : can forward or backward to the position of 0.1 second.
4.After playing at the appropriate position, choose the motion which need add, then click'add motion'button, popup'motion successfully added'means the motion at this time has finished.( tick means path one open, on the contrary it means close)
5.THE LAST MOTION: click the last motion button can skipped to the former motion
6.THE NEXT MOTION: click the next motion can skipped to the next one motion
7.GO: click the go button can skipped to the input time of the input form.
8.SAVE MOTION: click save the motion button auto save the motion to the film list after all the motion have finished edited ( motion file is ( *.jm It will be better that save a motion after adding a dozen motions )
9.DELETE MOTION: Skip to the time then click the delete motion button can delete the current motion when the motion is not wanted to.( can revise the click add button directly if it just want to revise the motion , and then it finished )
3-3 Examples for edit motion
To take edit Adventures of iceberg.avi: the three-dimensional film for example (to take two path control one cylinder for instance)
1.Click the open file button, skipped/bring out a dialogue box as shown. Choose Adventures of iceberg.avi, click open button.
2. Click the play button/ pause button: Can play or pause film playing, add motion only in the pause state.
3. Make the cylinder up at the position of 1.0 seconds
a.Click forward or backward button to the position of 1.0 seconds, or input 1.0at the edit dialog box and click the GO button to bring out the position of 1.0s
b.Tick cylinder one up, as shown.
c.Click ADD MOTION button add motions, that finished the motion at the position of 1.0s
4. Make cylinder one up and cylinder two down at the position of 2.0s
a. Click NEXT to the position of 2.0s
b. Taking off the tick of the cylinder one and tick the cylinder one down and cylinder two up. As shown.
c. click ADD MOTION to add motion.
5. TO make cylinder one stop\ cylinder two down\ cylinder three up at the position of 3.0s
a. Click NEXT to the position of 3.0s
b. Taking off the tick about the cylinder one down and the cylinder two up, tick the cylinder two up and the cylinder three up, as shown.
c. click ADD MOTION to add motions
6. Making the cylinder two stopped and the cylinder three continue to up\spray at the position of 4.0s
a. Click NEXT to the position of 4.0s
b. Taking off the tick about cylinder two down and tick electric machine one, as shown.
c. click ADD MOTION to add motions
7. Repeat the above steps, after finished editing the motion, click SAVE MOTION to save the motion as files. The file name of the motion file is 'Adventure of iceberg.jm. and Adventure of iceberg.xls. xls file just use to convenience the editor check the motion.
