Features:
2:1 wide input range
Protections: Short circuit / Over load / Over voltage
1500VDC I/O isolation
Built-in EMI filter, low ripple noise
100% full load burn-in test
Fixed switching frequency at 83KHz
Low cost
High reliability
1 year warranty
| MODEL | SD-50C-5 | |
| OUTPUT | DC VOLTAGE | 5V |
| RATED CURRENT | 10A | |
| CURRENT RANGE | 0 ~ 10A | |
| RATED POWER | 50W | |
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 4.5 ~ 5.5VDC | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±0.5% | |
| SETUP, RISE, HOLD TIME | 2.5s, 50ms, --- at full load | |
| INPUT | VOLTAGE RANGE | 36 ~ 72VDC |
| EFFICIENCY (Typ.) | 76% | |
| DC CURRENT | 1.5A/48V | |
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power |
| Protection type: Fold back current limiting, recovers automatically after fault condition is removed | ||
| OVER VOLTAGE | 5.75 ~ 6.75V/10% load | |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
| ENVIRONMENT | WORKING TEMP. | -10 ~ +60ºC |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
| SAFETY & EMC (Note 4) | SAFETY STANDARDS | Design refer to LVD |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
| EMI CONDUCTION & RADIATION | Design refer to EN55022(CISPR22) CLASS B | |
| EMS IMMUNITY | Design refer to EN61000-4-2,3,4,6,8;ENV50204,EN55024,light industry level, criteria A | |
| OTHERS | MTBF | 368.5K hrs min. MIL-HDBK-217F (25ºC ) |
| DIMENSION | 159*97*36mm (L*W*H) | |
| PACKING | 0.53Kg; 24pcs/12.7Kg/0.75CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at normal input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |
50W DC to DC Power Converter SD-50C-5 Mechanical Specification:
50W DC to DC Power Converter SD-50C-5 Certificate for LVD:
SD-50C-5 Certificate for EMC:
