DL series vertical multi-stage centrifugal pump
DL series pump is vertical, single and multi-layer absorption, stage centrifugal pump for conveying water and chemical and physical properties similar to the 85 ℃ water of fluid or use. DLR type heat pump transport medium temperature of 150 ℃ below 2. The pump is vertical installation, a compact structure, low noise, cover an area of an area small, characteristics, main used for urban water supply and the central heating system.
Characterstics
Pump model significance: 65 DL R 30-16 x 5 Number five, for impeller The head of a single impeller produce for 16 m The flow rate of the pump to 30 m 3 / h ReShuiXing Vertical multistage pumps Pump water caliber
DL series vertical multi-stage centrifugal pump
Pump model significance: 65 DL R 30-16 x 5 Number five, for impeller The head of a single impeller produce for 16 m The flow rate of the pump to 30 m 3 / h ReShuiXing Vertical multistage pumps Pump water caliber
DL series vertical multi-stage centrifugal pump
Application
1. DL type pump for vertical structure, and its suction is located in the section of the pump water (bottom), located in section water nozzles (the upper portion of the pump), are in horizontal layout.
2. Type the main parts, the pump is: water section, interruption, for water, filling body, impeller, diffuser, water period of diffuser, shaft, bearing, bushings, balance drum, balance set, the connection frame etc.
1. DL type pump for vertical structure, and its suction is located in the section of the pump water (bottom), located in section water nozzles (the upper portion of the pump), are in horizontal layout.
2. Type the main parts, the pump is: water section, interruption, for water, filling body, impeller, diffuser, water period of diffuser, shaft, bearing, bushings, balance drum, balance set, the connection frame etc.
This series of horizontal multistage centrifugal pump for both ends supporting.centre, shell part is the day, the pump transmission mode of powder is through the flexible coupling and motor connection 1. Part of the stator Mainly by breathing in part, middle, spit out section, diffuser, stuffing box body, they respectively with strained bolt coupling as a body, vomit exports and the suction were vertical. 2. The rotor parts Mainly by the axis, impeller, balance dish ji collar, etc parts.
