SDA Series thin type(compact) pneumatic cylinder
Specifications
Specifications
1.good appearance and low price
2.sincere service
3.fast delivery
Under the circumstance of same drivers, only 50% of the standard Cylinder installation space is needed
2.sincere service
3.fast delivery
List Of Components | |||||||
NO | Denomination | NO | Denomination | ||||
1 | Back Over | 2 | Type C Buckle Ring | ||||
3 | O-Ring | 4 | Auti-Crash Cushion | ||||
5 | Piston | 6 | Pision O-Ring | ||||
7 | Audi-Crash Cushion | 8 | Barrel | ||||
9 | Front Cover Seal Ring | 10 | Frongt Cover | ||||
11 | Piston Rod | 12 | Pision Rod Nut |
List Of Components | |||||||
NO | Denomination | NO | Denomination | ||||
1 | Back Over | 2 | Type C Buckle Ring | ||||
3 | Auti-Crash Cushion | 4 | Pision | ||||
5 | Piston O-Ring | 6 | Compressed Spring | ||||
7 | Barrel | 8 | Silencer | ||||
9 | O-Ring | 10 | Frongt Cover | ||||
11 | Piston Rod |
List Of Components | |||||||
NO | Denomination | NO | Denomination | ||||
1 | Back Over | 2 | Type C Buckle Ring | ||||
3 | O-Ring | 4 | Silencer | ||||
5 | Barrel | 6 | Compressed Spring | ||||
7 | Piston | 8 | Pision O-Ring | ||||
9 | Auti-Crash Cushion | 10 | Frongt Cover Seal Ring | ||||
11 | Frongt Cover | 12 | Piston Rod |
Specification | ||||||||||||||
Bore | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | ||||
Motion Pattern | Double Action | |||||||||||||
Single Action Extrusion Type Single Action Drawing-IN Type | ||||||||||||||
Working Medium | Air | |||||||||||||
Operating Voltage Range | Double Action | 0.1~0.9MPa | ||||||||||||
Single Action | 0.2~0.9MPa | |||||||||||||
Ensured Pressure Resistance | 1.35MPa | |||||||||||||
Operating Temperature Range | 5~70℃ | |||||||||||||
Operating Speed Range | Double Action | 30~500mm/S | 30~350mm/S | 30~250mm/S | ||||||||||
Single Action | 100~500mm/S | |||||||||||||
Buffer Type | Fixed Type Buffer | |||||||||||||
Pipe Size | M5×0.8 | G1/8'' | G1/4'' | G3/8'' |
Under the circumstance of same drivers, only 50% of the standard Cylinder installation space is needed
* Proximity transducer is flush mounted inside sensor groove, on one hand, prevent sensor from mechanical damage
* Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
* Accessories are abundant in variety, which makes cylinder can be installed almost at any places