Frequency Induction melting Furnace

 GYG-1-240 energy saving Frequency Induction melting Furnace, mainly used in smelting the carbon steel, metals and so on alloy steel, high-manganese steel, ferroalloy, cast alloy iron, gray iron, copper, copper alloy smelts, because the furnace temperature is higher than 1600℃, and has six grade of temperature controls, suitably in 1250-1600℃ the different melting point metal's smelting, and may fall the files heat preservation to wait for the casting or the adjustment melt fluid ingredient, the electromagnetism magnetic field magnetic line of force automatic agitation causes the ingredient to be even, non-element loss by burning. Because the capacity is big, each furance leaves the fluid 1.2-1.5 tons, but power 240KW, is only only equal in 0.5 ton 250KW intermediate frequency furance uses electricity, therefore is the energy conservation smelting furnace. Because leaves the fluid capacity to be big, and can the continual smelting, therefore the especially qualify medium factory, carries on the mass continual smelting way to the sole variety, when needs to replace the variety, may adopt keeps little partial fluid furnace cleaning refueling or but actually melts the fluid to carry on is hot the melt, may also pound hits the granulated substance material furnace lining smelting washout life to replace the variety at the appointed time.

Structure description:
    GYG-1-240 energy saving Frequency Induction melting Furnace, made up by the furnace body, the sensor, the pressure regulator, leans the furance structure, the control electricity cabinet, to compensate parts and so on electric capacity. The furnace body is made 2200×1500 the outer covering main body by the 12mm steel plate, lower part the furnace body 45° the installment has the sensor, the sensor orientation silicon steel plate is made the weight 2 ton induction iron cores by Wuhan Steel Corporation Silicon steel plate Factory production top gear's W-151 the cold rolling 0.35m/m, primary is made the water cooling coil by 10×10×2 the copper pipe, and installs the stainless steel water cooling restricting, the power frequency has the core smelting furnace's metal melt fluid namely for the sensor sencondary coil, the entire electric furance is a transformer actually, the necessary 6 grades from the pair regulating transformer, shift gears by the electricity cabinet control, the voltage may from low to high, divide 6 promotions to arrive at 380V, each grade of voltages are different, the output is also different, the furnace temperature along with the files position is also different, but the height is different, adapts smelts colored or the black and so on melting point different metals, and may make the new furnace lining to smelt diamantine drying furnace fireproof. Leans the furance organization to lean the furance by 2 speed reducers from the electric furance both sides to pour molten steel electrically operated. Because an entire power frequency furance quite transformer, therefore the power factor reaches 0.8-0.95. Because time metallurgy smelting, the metal melt fluid washes out the furnace lining unceasingly, the different furnace lining material, the furnace lining smelting life is dissimilar, the different metal adapts the furnace lining material is dissimilar, therefore power frequency furance leaving the plant is also same as any type smelting leaving the plant, does not provide the furnace lining material, the use factory should have the professional furnace lining technical personnel and build the furnaceman.

More detailed technical___directly sale Tel:027-83372766 83372755 13807177084

Technical parameters: