Invar 36 Wire
Invar 36 wire is known as Alloy 36 which is a 36% nickel-iron alloy possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 400ºF(204ºC)
Alloy 36 Wire has near zero coefficient of thermal expansion at room temperature and till 100°C. It is used in instrumentation and in thermostats. It is also used as bimetallic strip in cryogenic engineering and laser components.
To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.
Wire Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch
Specifications of Invar 36-Alloy 36:
Alloy | Werkstoff Nr | UNS Designation | ASTM |
Alloy 36 | 1.3912 | K 93600 | B 753 |
Typical Chemistry (Wt.%) of Invar 36-Alloy 36:
Alloy | Nickel | Mn | Si | Cr | Iron |
Alloy 36 | 36% | 0.5 | 0.25 | 0.25 | Balance |
Typical Physical Properties of Invar 36-Alloy 36:
Thermal Expansion: Mean Coefficient x 10-6 K/ºC | 20-100 | 20-200 | 20-300 | 20-400 | 20-500 |
Alloy 36 | 1.5 | 2.6 | 5.5 | 8.4 | 10.1 |
Typical Electrical & Mechanical Properties of Invar 36-Alloy 36:
Alloy | Electrical Resistivity µΩ-cm | Density g/cm³ | Tensile Strength N/mm² | Hardness HV |
Alloy 36 | 80 | 8.11 | 490 | 150 |
Applications:
Ø Molds for composite aircraft parts
Ø Molds for composite boat parts
Ø Precision condenser plates
Ø Resonant cavities for radars
Ø Precision measurements constructions
Ø Special joints and washers
Ø Thermostatic bimetals
Ø Laser part applications
Ø Clock pendulums
Ø Balance wheels
Ø Watch parts
Ø Tooling
Cut to length Wire | |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
